YOKOGAWA DL9040

5-47
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:V<x>?
Function Queries all settings related to the power value of the
marker cursor of the FFT computation.
Syntax
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:V<x>?
<x> of FFT<x> = 1 or 2
<x> of V<x> = 1 or 2
Example
:ANALYSIS:FFT1:MEASURE:MARKER:BASIC:V1?
-> :ANALYSIS:FFT1:MEASURE:MARKER:
BASIC:STATE 1
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:V<x>:STATe
Function Turns ON/OFF the power value of the marker cursor
of the FFT computation or queries the current setting.
Syntax
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:V<x>:STATe {<Boolean>}
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:V<x>:STATe?
<x> of FFT<x> = 1 or 2
<x> of V<x> = 1 or 2
Example
:ANALYSIS:FFT1:MEASURE:MARKER:BASIC:V1:
STATE ON
:ANALYSIS:FFT1:MEASURE:MARKER:BASIC:V1:
STATE? -> :ANALYSIS:FFT1:MEASURE:
MARKER:BASIC:V1:STATE 1
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:V<x>:VALue?
Function Queries the power value of the marker cursor of the
FFT computation.
Syntax
:ANALysis:FFT<x>:MEASure:
MARKer[:BASic]:V<x>:VALue?
<x> of FFT<x> = 1 or 2
<x> of V<x> = 1 or 2
Example
:ANALYSIS:FFT1:MEASURE:MARKER:BASIC:V1:
VALUE? -> :ANALYSIS:FFT1:MEASURE:
MARKER:BASIC:V1:VALUE 1.000E+00
:ANALysis:FFT<x>:MEASure:MARKer:
CALCulation?
Function Queries all settings related to calculation items of the
marker cursor of the FFT computation.
Syntax
:ANALysis:FFT<x>:MEASure:MARKer:
CALCulation?
<x> = 1 or 2
Example
:ANALYSIS:FFT1:MEASURE:MARKER:
CALCULATION? -> :ANALYSIS:FFT1:MEASURE:
MARKER:CALCULATION:DEFINE1 "V(F1)";
DEFINE2 "V(F2)";DEFINE3 "V(F1)";D
EFINE4 "V(F2)";STATE1 1;STATE2 1;
STATE3 1;STATE4 1
:ANALysis:FFT<x>:MEASure:MARKer:
CALCulation:ALL
Function Turns ON/OFF all calculation items of the marker
cursor of the FFT computation.
Syntax
:ANALysis:FFT<x>:MEASure:MARKer:
CALCulation:ALL {<Boolean>}
<x> = 1 or 2
Example
:ANALYSIS:FFT1:MEASURE:MARKER:
CALCULATION:ALL ON
:ANALysis:FFT<x>:MEASure:MARKer:
CALCulation:DEFine<x>
Function Sets the equation of the calculation items of the
marker cursor of the FFT computation or queries the
current setting.
Syntax
:ANALysis:FFT<x>:MEASure:MARKer:
CALCulation:DEFine<x> {<String>}
:ANALysis:FFT<x>:MEASure:MARKer:
CALCulation:DEFine<x>?
<x> of FFT<x> = 1 or 2
<x> of DEFine<x> = 1 to 4
<String> = Up to 128 characters
Example
:ANALYSIS:FFT1:MEASURE:MARKER:
CALCULATION:DEFINE1 "V(F1)"
:ANALYSIS:FFT1:MEASURE:MARKER:
CALCULATION:DEFINE1? -> :ANALYSIS:FFT1:
MEASURE:MARKER:CALCULATION:
DEFINE1 "V(F1)"
:ANALysis:FFT<x>:MEASure:MARKer:
CALCulation:STATe<x>
Function Turns ON/OFF the calculation items of the marker
cursor of the FFT computation or queries the current
setting.
Syntax
:ANALysis:FFT<x>:MEASure:MARKer:C
ALCulation:STATe<x> {<Boolean>}
:ANALysis:FFT<x>:MEASure:MARKer:
CALCulation:STATe<x>?
<x> of FFT<x> = 1 or 2
<x> of ST
ATe<x> = 1 to 4
Example
:ANALYSIS:FFT1:MEASURE:MARKER:
CALCULATION:STATE1 ON
:ANALYSIS:FFT1:MEASURE:MARKER:
CALCULATION:STATE1? -> :ANALYSIS:FFT1:
MEASURE:MARKER:CALCULATION:STATE1 1
5.3 ANALysis Group