5-56
IM 701310-17E
:ANALysis:WPARameter<x>:HISTogram:
MEASure:PARameter:<Parameter>?
Function Queries all settings related to the histogram
parameter of the waveform parameter measurement.
Syntax
:ANALysis:WPARameter<x>:HISTogram:
MEASure:PARameter:<Parameter>?
<x> = 1 or 2
<Parameter> = {MEAN|PEAK|SD3integ|
SDEV
iation|SDINteg}
Example (The following is an example for the average value.)
:ANALYSIS:WPARAMETER1:HISTOGRAM:
MEASURE:PARAMETER:MEAN? -> :ANALYSIS:
WPARAMETER1:HISTOGRAM:MEASURE:
PARAMETER:MEAN:STATE 1
:ANALysis:WPARameter<x>:HISTogram:
MEASure:PARameter:<Parameter>:STATe
Function Turns ON/OFF the histogram parameter of the
waveform parameter measurement or queries the
current setting.
Syntax
:ANALysis:WPARameter<x>:HISTogram:
MEASure:PARameter:<Parameter>:STATe
{<Boolean>}
:ANALysis:WPARameter<x>:HISTogram:
MEASure:PARameter:<Parameter>:STATe?
<x> = 1 or 2
<Parameter> = {MEAN|PEAK|SD3integ|
SDEV
iation|SDINteg}
Example (The following is an example for the average value.)
:ANALYSIS:WPARAMETER1:HISTOGRAM:
MEASURE:PARAMETER:MEAN:STATE ON
:ANALYSIS:WPARAMETER1:HISTOGRAM:
MEASURE:PARAMETER:MEAN:STATE?
-> :ANALYSIS:WPARAMETER1:HISTOGRAM:
MEASURE:PARAMETER:MEAN:STATE 1
:ANALysis:WPARameter<x>:HISTogram:
MEASure:PARameter:<Parameter>:VALue?
Function Queries the measured value of the histogram
parameter of the waveform parameter measurement.
Syntax
:ANALysis:WPARameter<x>:HISTogram:
MEASure:PARameter:<Parameter>:VALue?
<x> = 1 or 2
<Parameter> = {MEAN|PEAK|SD3integ|
SDEV
iation|SDINteg}
Example (The following is an example for the average value.)
:ANALYSIS:WPARAMETER1:HISTOGRAM:
MEASURE:PARAMETER:MEAN:VALUE?
-> :ANALYSIS:WPARAMETER1:HISTOGRAM:
MEASURE:PARAMETER:MEAN:VALUE 1.000E+00
:ANALysis:WPARameter<x>:LIST?
Function Queries all settings related to the list display of the
waveform parameter measurement.
Syntax
:ANALysis:WPARameter<x>:LIST?
<x> = 1 or 2
Example
:ANALYSIS:WPARAMETER1:LIST?
-> :ANALYSIS:WPARAMETER1:LIST:
MODE STATISTIC;SCROLL HORIZONTAL
:ANALysis:WPARameter<x>:LIST:ITEM?
Function Queries list display items of the waveform parameter
measurement.
Syntax
:ANALysis:WPARameter<x>:LIST:ITEM?
<x> = 1 or 2
Example
:ANALYSIS:WPARAMETER1:LIST:ITEM?
-> :ANALYSIS:WPARAMETER1:LIST:
ITEM "LOW(C1)"
:ANALysis:WPARameter<x>:LIST:MODE
Function Sets the list display mode of the waveform parameter
measurement or queries the current setting.
Syntax
: ANALysis:WPARameter<x>:LIST:MODE
{STATistic|TRENd}
: ANALysis:WPARameter<x>:LIST:MODE?
<x>=1 or 2
Example
: ANALYSIS:WPARAMETER1:LIST:MODE
STATISTIC
: ANALYSIS:WPARAMETER1:LIST:MODE?
-> : ANALYSIS:WPARAMETER1:LIST:
MODE STATISTIC
:ANALysis:WPARameter<x>:LIST:SCRoll
Function Sets the scroll direction of the list display of the
waveform parameter measurement or queries the
current setting.
Syntax
:ANALysis:WPARameter<x>:LIST:SCRoll
{HORizontal|VERTical}
:ANALysis:WPARameter<x>:LIST:SCRoll?
<x> = 1 or 2
Example
:ANALYSIS:WPARAMETER1:LIST:
SCROLL HORIZONTAL
:ANALYSIS:WPARAMETER1:LIST:SCROLL?
-> :ANALYSIS:WPARAMETER1:LIST:
SCROLL HORIZONTAL
5.3 ANALysis Group
To Next Page
Loading...
