YOKOGAWA DL9040

5-58
IM 701310-17E
:ANALysis:WPARameter<x>:TRENd:
ASCale[:EXECute]
Function Executes the auto scaling of the trend display of the
waveform parameter measurement.
Syntax
:ANALysis:WPARameter<x>:TRENd:
ASCale[:EXECute]
<x> = 1 or 2
Example
:ANALYSIS:WPARAMETER1:TREND:ASCALE:
EXECUTE
:ANALysis:WPARameter<x>:TRENd:HRANge
Function Sets the target window for trend display of measured
waveform parameters or queries the current setting.
Syntax
:ANALysis:WPARameter<x>:TRENd:
HRANge {MAIN|Z1|Z2}
:ANALysis:WPARameter<x>:TRENd:HRANge?
<x> = 1 or 2
Example
:ANALYSIS:WPARAMETER1:TREND:HRANGE MAIN
:ANALYSIS:WPARAMETER1:TREND:HRANGE?
-> :ANALYSIS:WPARAMETER1:TREND:
HRANGE MAIN
:ANALysis:WPARameter<x>:TRENd:HSPan
Function Sets the horizontal span of the trend display of the
waveform parameter measurement or queries the
current setting.
Syntax
:ANALysis:WPARameter<x>:TRENd:HSPan
{<NRf>}
:ANALysis:WPARameter<x>:TRENd:HSPan?
<x> = 1 or 2
<NRf> = 1 to 100000
Example
:ANALYSIS:WPARAMETER1:TREND:HSPAN 1
:ANALYSIS:WPARAMETER1:TREND:HSPAN?
-> :ANALYSIS:WPARAMETER1:TREND:HSPAN 1
:ANALysis:WPARameter<x>:TRENd:
MEASure?
Function Queries all settings related to the automated
measurement of the trend display of the waveform
parameter measurement.
Syntax
:ANALysis:WPARameter<x>:TRENd:MEASure?
<x> = 1 or 2
Example
:ANALYSIS:WPARAMETER1:TREND:MEASURE?
-> :ANALYSIS:WPARAMETER1:TREND:MEASURE:
CURSOR:C1:POSITION 1.000E+00;STATE 1;
:ANALYSIS:WPARAMETER1:TREND:MEASURE:
CURSOR:C2:POSITION 2.000E+00;STATE 1;
:ANALYSIS:WPARAMETER1:TREND:MEASURE:
CURSOR:DC:STATE 1;
:ANALYSIS:WPARAMETER1:TREND:
MEASURE:MODE CURSOR
:ANALysis:WPARameter<x>:TRENd:
MEASure:CURSor?
Function Queries all settings related to the cursor
measurement of the trend of the waveform parameter
measurement.
Syntax
:ANALysis:WPARameter<x>:TRENd:MEASure:
CURSor?
<x> = 1 or 2
Example
:ANALYSIS:WPARAMETER1:TREND:MEASURE:
CURSOR? -> :ANALYSIS:WPARAMETER1:TREND:
MEASURE:CURSOR:C1:POSITION 1.000E+00;
STATE 1;:ANALYSIS:WPARAMETER1:TREND:
MEASURE:CURSOR:C2:POSITION 2.000E+00;
STATE 1;:ANALYSIS:WPARAMETER1:TREND:
MEASURE:CURSOR:DC:STATE 1
:ANALysis:WPARameter<x>:TRENd:
MEASure:CURSor:ALL
Function Turns ON/OFF all cursors of the trend of the
waveform parameter measurement.
Syntax
:ANALysis:WPARameter<x>:TRENd:MEASure:
CURSor:ALL {<Boolean>}
<x> = 1 or 2
Example
:ANALYSIS:WPARAMETER1:TREND:MEASURE:
CURSOR:ALL ON
:ANALysis:WPARameter<x>:TRENd:
MEASure:CURSor:C<x>?
Function Queries all settings related to the measured value
of the cursor of the trend of the waveform parameter
measurement.
Syntax
:ANALysis:WPARameter<x>:TRENd:MEASure:
CURSor:C<x>?
<x> of WPARameter<x> = 1 or 2
<x> of C<x> = 1 or 2
Example
:ANALYSIS:WPARAMETER1:TREND:MEASURE:
CURSOR:C1? -> :ANALYSIS:WPARAMETER1:
TREND:MEASURE:CURSOR:C1:
POSITION 1.000E+00;STATE 1
5.3 ANALysis Group