YOKOGAWA DL9040 - Page 94

5-60
IM 701310-17E
:ANALysis:XY<x>?
Function Queries all settings related to the XY display function.
Syntax
:ANALysis:XY<x>?
<x> = 1 or 2
Example
:ANALYSIS:XY1? -> :ANALYSIS:XY1:
GATE:ALEVEL HIGH;HYSTERESIS1 1.000E+00;
HYSTERESIS2 1.000E+00;
HYSTERESIS3 1.000E+00;
HYSTERESIS4 1.000E+00;
HYSTERESIS5 1.000E+00;
HYSTERESIS6 1.000E+00;
HYSTERESIS7 1.000E+00;
HYSTERESIS8 1.000E+00;LEVEL1 1.000E+00;
LEVEL2 1.000E+00;LEVEL3 1.000E+00;
LEVEL4 1.000E+00;LEVEL5 1.000E+00;
LEVEL6 1.000E+00;LEVEL7 1.000E+00;
LEVEL8 1.000E+00;TRACE 1;:ANALYSIS:XY1:
MEASURE:CURSOR:X1:POSITION 1.000E+00;:
ANALYSIS:XY1:MEASURE:CURSOR:X2:
POSITION 2.000E+00;:ANALYSIS:XY1:
MEASURE:CURSOR:XLINkAGE 1;Y1:
POSITION 1.000E+00;:ANALYSIS:XY1:
MEASURE:CURSOR:Y2:POSITION 2.000E+00;:
ANALYSIS:XY1:MEASURE:CURSOR:
YLINkAGE 1;:ANALYSIS:XY1:MEASURE:
MODE CURSOR;XYINTEG:LOOP CLOSE;
POLARITY CCW;:ANALYSIS:XY1:
TRANGE 1.000E+00,0.000E+00;WINDOW MAIN;
XTRACE 1;YTRACE 1
:ANALysis:XY<x>:GATE?
Function Queries all settings related to the gate function of the
XY display.
Syntax
:ANALysis:XY<x>:GATE?
<x> = 1 or 2
Example
:ANALYSIS:XY1:GATE? -> :ANALYSIS:XY1:
GATE:ALEVEL HIGH;
HYSTERESIS1 1.000E+00;
HYSTERESIS2 1.000E+00;
HYSTERESIS3 1.000E+00;
HYSTERESIS4 1.000E+00;
HYSTERESIS5 1.000E+00;
HYSTERESIS6 1.000E+00;
HYSTERESIS7 1.000E+00;
HYSTERESIS8 1.000E+00;LEVEL1 1.000E+00;
LEVEL2 1.000E+00;LEVEL3 1.000E+00;
LEVEL4 1.000E+00;LEVEL5 1.000E+00;
LEVEL6 1.000E+00;LEVEL7 1.000E+00;
LEVEL8 1.000E+00;TRACE 1
:ANALysis:WPARameter<x>:TRENd:MEASure:
CURSor:LINKage
Function Turns ON/OFF the trend cursor link of the waveform
parameter measurement or queries the current
setting.
Syntax
:ANALysis:WPARameter<x>:TRENd:MEASure:
CURSor:LINKage {<Boolean>}
:ANALysis:WPARameter<x>:TRENd:MEASure:
CURSor:LINKage?
<x> = 1 or 2
Example
:ANALYSIS:WPARAMETER1:TREND:MEASURE:
CURSOR:LINKAGE ON
:ANALYSIS:WPARAMETER1:TREND:MEASURE:
CURSOR:LINKAGE? -> :ANALYSIS:
WPARAMETER1:TREND:MEASURE:
CURSOR:LINKAGE 1
:ANALysis:WPARameter<x>:TRENd:MEASure:
MODE
Function Sets the automated measurement mode of the trend
of the waveform parameter measurement or queries
the current setting.
Syntax
:ANALysis:WPARameter<x>:TRENd:MEASure:
MODE {CURSor|OFF}
:ANALysis:WPARameter<x>:TRENd:MEASure:
MODE?
<x> = 1 or 2
Example
:ANALYSIS:WPARAMETER1:TREND:MEASURE:
MODE CURSOR
:ANALYSIS:WPARAMETER1:TREND:MEASURE:
MODE? -> :ANALYSIS:WPARAMETER1:TREND:
MEASURE:MODE CURSOR
:ANALysis:WPARameter<x>:TRENd:VERTical
Function Sets the vertical range of the trend of the waveform
parameter measurement or queries the current
setting.
Syntax
:ANALysis:WPARameter<x>:TRENd:VERTical
{<NRf>,<NRf>}
:ANALysis:WPARameter<x>:TRENd:VERTical?
<x> = 1 or 2
<NRf> = –1.000E+31 to 1.000E+31 (div)
Example
:ANALYSIS:WPARAMETER1:TREND:
VERTICAL 1,2
:ANALYSIS:WPARAMETER1:TREND:VERTICAL?
-> :ANALYSIS:WPARAMETER1:TREND:
VERTICAL 2.000E+00,1.000E+00
5.3 ANALysis Group