YOKOGAWA DL9040

5-62
IM 701310-17E
:ANALysis:XY<x>:MEASure:CURSor:X<x>:
VALue?
Function Queries the voltage value at the horizontal cursor of
the XY display.
Syntax
:ANALysis:XY<x>:MEASure:CURSor:X<x>:
VALue?
<x> of XY<x> = 1 or 2
<x> of X<x> = 1 or 2
Example
:ANALYSIS:XY1:MEASURE:CURSOR:X1:VALUE?
-> :ANALYSIS:XY1:MEASURE:CURSOR:X1:
VALUE 1.000E+00
:ANALysis:XY<x>:MEASure:CURSor:
YLINkage
Function Turns ON/OFF the vertical cursor link on the XY
display or queries the current setting.
Syntax
:ANALysis:XY<x>:MEASure:CURSor:
YLINkage {<Boolean>}
:ANALysis:XY<x>:MEASure:CURSor:
YLINkage?
<x> = 1 or 2
Example
:ANALYSIS:XY1:MEASURE:CURSOR:
YLINkAGE ON
:ANALYSIS:XY1:MEASURE:CURSOR:YLINkAGE?
-> :ANALYSIS:XY1:MEASURE:CURSOR:
YLINkAGE 1
:ANALysis:XY<x>:MEASure:CURSor:Y<x>?
Function Queries all settings related to the vertical cursor of
the XY display.
Syntax
:ANALysis:XY<x>:MEASure:CURSor:Y<x>?
<x> of XY<x> = 1 or 2
<x> of
Y<x> = 1 or 2
Example
:ANALYSIS:XY1:MEASURE:CURSOR:Y1?
-> :ANALYSIS:XY1:MEASURE:CURSOR:Y1:
POSITION 1.000E+00
:ANALysis:XY<x>:MEASure:CURSor:Y<x>:
POSition
Function Sets the vertical cursor position of the XY display or
queries the current setting.
Syntax
:ANALysis:XY<x>:MEASure:CURSor:Y<x>:
POSition {<NRf>}
:ANALysis:XY<x>:MEASure:CURSor:Y<x>:
POSition?
<x> of XY<x> = 1 or 2
<x> of
Y<x> = 1 or 2
<NRf> = –4 to 4 (div)
Example
:ANALYSIS:XY1:MEASURE:CURSOR:Y1:
POSITION 1
:ANALYSIS:XY1:MEASURE:CURSOR:Y1:
POSITION? -> :ANALYSIS:XY1:MEASURE:
CURSOR:Y1:POSITION 1.000E+00
:ANALysis:XY<x>:MEASure:CURSor:
XLINkage
Function Turns ON/OFF the horizontal cursor link on the XY
display or queries the current setting.
Syntax
:ANALysis:XY<x>:MEASure:CURSor:
XLINkage {<Boolean>}
:ANALysis:XY<x>:MEASure:CURSor:
XLINkage?
<x> = 1 or 2
Example
:ANALYSIS:XY1:MEASURE:CURSOR:
XLINkAGE ON
:ANALYSIS:XY1:MEASURE:CURSOR:XLINkAGE?
-> :ANALYSIS:XY1:MEASURE:CURSOR:
XLINkAGE 1
:ANALysis:XY<x>:MEASure:CURSor:X<x>?
Function Queries all settings related to the horizontal cursor of
the XY display.
Syntax
:ANALysis:XY<x>:MEASure:CURSor:X<x>?
<x> of XY<x> = 1 or 2
<x> of X<x> = 1 or 2
Example
:ANALYSIS:XY1:MEASURE:CURSOR:X1?
-> :ANALYSIS:XY1:MEASURE:CURSOR:X1:
POSITION 1.000E+00
:ANALysis:XY<x>:MEASure:CURSor:X<x>:
POSition
Function Sets the horizontal cursor position of the XY display
or queries the current setting.
Syntax
:ANALysis:XY<x>:MEASure:CURSor:X<x>:
POSition {<NRf>}
:ANALysis:XY<x>:MEASure:CURSor:X<x>:
POSition?
<x> of XY<x> = 1 or 2
<x> of X<x> = 1 or 2
<NRf> = –4 to 4 (div)
Example
:ANALYSIS:XY1:MEASURE:CURSOR:X1:
POSITION 1
:ANALYSIS:XY1:MEASURE:CURSOR:X1:
POSITION? -> :ANALYSIS:XY1:MEASURE:
CURSOR:X1:POSITION 1.000E+00
5.3 ANALysis Group