YOKOGAWA DLM2000 Series User Manual

5-108
IM 710105-17E
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:HORizontal
Function Sets or queries the horizontal position of the
rectangle that will be used for rectangular zone
determination.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:RECTan
gle:HORizontal {<NRf>,<NRf>}
:GONogo[:ZPARameter]:NUMBer<x>:RECTan
gle:HORizontal?
<x> = 1 to 4
<NRf>=−5to5(divisions)
Example
:GONOGO:ZPARAMETER:NUMBER1:RECTANGLE:
HORIZONTAL 1,2
:GONOGO:ZPARAMETER:NUMBER1:RECTANGLE:
HORIZONTAL?
-> :GONOGO:ZPARAMETER:NUMBER1:RECTANG
LE:HORIZONTAL 2.000E+00,1.000E+00
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:RANGe
Function Sets or queries the source window of the
rectangle that will be used for rectangular zone
determination.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:RECTan
gle:RANGe {MAIN|Z1|Z2}
:GONogo[:ZPARameter]:NUMBer<x>:RECTan
gle:RANGe?
<x> = 1 to 4
Example
:GONOGO:ZPARAMETER:NUMBER1:RECTANGLE:
RANGE MAIN
:GONOGO:ZPARAMETER:NUMBER1:RECTANGLE:
RANGE?
-> :GONOGO:ZPARAMETER:NUMBER1:RECTANG
LE:RANGE MAIN
Description When TRACe is set to XY<x>, the <NRf> is 1 to 4
(div).
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:TRACe
Function Sets or queries the source waveform of the
rectangle that will be used for rectangular zone
determination.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:RECTan
gle:TRACe {<NRf>|MATH<x>|XY<x>}
:GONogo[:ZPARameter]:NUMBer<x>:RECTan
gle:TRACe?
<x> = 1 to 4
<NRf> = 1 to 4 (1 or 2 for 2-channel models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
<x> of XY<x> = 1 or 2 (1 only for 2-channel
models)
Example
:GONOGO:ZPARAMETER:NUMBER1:RECTANGLE:
TRACE 1
:GONOGO:ZPARAMETER:NUMBER1:RECTANGLE:
TRACE?
-> :GONOGO:ZPARAMETER:NUMBER1:RECTANG
LE:TRACE 1
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:VERTical
Function Sets or queries the vertical position of the
rectangle that will be used for rectangular zone
determination.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:RECTan
gle:VERTical {<NRf>,<NRf>}
:GONogo[:ZPARameter]:NUMBer<x>:RECTan
gle:VERTical?
<x> = 1 to 4
<NRf>=−4to4(divisions)
Example
:GONOGO:ZPARAMETER:NUMBER1:RECTANGLE:
VERTICAL 1,2
:GONOGO:ZPARAMETER:NUMBER1:RECTANGLE:
VERTICAL?
-> :GONOGO:ZPARAMETER:NUMBER1:RECTANG
LE:VERTICAL 2.000E+00,1.000E+00
:GONogo[:ZPARameter]:NUMBer<x>:WAVE?
Function Queries all waveform zone determination settings.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:WAVE?
<x> = 1 to 4
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
EDIT:EXIT
Function Exits from the waveform zone edit menu.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:E
DIT:EXIT {QUIT|STORe}
<x> = 1 to 4
Example
:GONOGO:ZPARAMETER:NUMBER1:WAVE:EDIT:
EXIT STORE
Description When
STORe
is specified, the edited contents are
saved, and the edit menu is closed.
When
QUIT
is specified, the edit menu is closed
without saving the edited contents.
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
EDIT:NEW
Function Sets the base waveform in waveform zone editing.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:E
DIT:NEW {<NRF>|Math<x>}
<x> = 1 to 4
<NRf> = 1 to 4 (1 or 2 on 2-channel models)
<x> of Math<x> = 1 or 2 (1 on 2-channel models)
Example
:GONOGO:ZPARAMETER:NUMBER1:WAVE:EDIT:
NEW 1
Description When you finish editing, you need to use
:GONog
o[:ZPARameter]:NUMBer<x>:WAVE:EDIT:EX
IT
to exit from the edit menu.
5.13 GONogo Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English