YOKOGAWA DLM2000 Series - Page 150

5-117
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:HISTory[:SEARch]:NUMBer<x>:WAVE:ZNU
Mber
Function Sets or queries the zone number that will be used
for waveform zone searching.
Syntax
:HISTory[:SEARch]:NUMBer<x>:WAVE:ZNUM
ber {<NRf>}
:HISTory[:SEARch]:NUMBer<x>:WAVE:ZNUM
ber?
<x> = 1 to 4
<NRf> = 1 to 4
Example
:HISTORY:SEARCH:NUMBER1:WAVE:ZNUMB
ER 1
:HISTORY:SEARCH:NUMBER1:WAVE:ZNUMBER?
-> :HISTORY:SEARCH:NUMBER1:WAVE:ZNUMB
ER 1
:HISTory[:SEARch]:SIMPle?
Function Queries all simple searching settings.
Syntax
:HISTory[:SEARch]:SIMPle?
:HISTory[:SEARch]:SIMPle:HORizontal
Function Sets or queries the horizontal position of the
rectangle to use in simple searching.
Syntax
:HISTory[:SEARch]:SIMPle:HORizont
al {<NRf>,<NRf>}
:HISTory[:SEARch]:SIMPle:HORizontal?
<NRf> = −5to5(div)
Example
:HISTORY:SEARCH:SIMPLE:HORIZONTAL 1,2
:HISTORY:SEARCH:SIMPLE:HORIZONTAL?
-> :HISTORY:SEARCH:SIMPLE:
HORIZONTAL 2.000E+00,1.000E+00
:HISTory[:SEARch]:SIMPle:RANGe
Function Sets or queries the target window of the rectangle
to use in simple searching.
Syntax
:HISTory[:SEARch]:SIMPle:RANGe {MAIN|
Z1|Z2}
:HISTory[:SEARch]:SIMPle:RANGe?
Example
:HISTORY:SEARCH:SIMPLE:RANGE MAIN
:HISTORY:SEARCH:SIMPLE:RANGE?
-> :HISTORY:SEARCH:SIMPLE:RANGE MAIN
:HISTory[:SEARch]:SIMPle:TRACe
Function Sets or queries the source trace of the rectangle
to use in simple searching.
Syntax
:HISTory[:SEARch]:SIMPle:TRACe {<NRf>
|MATH<x>|XY<x>}
:HISTory[:SEARch]:SIMPle:TRACe?
<NRf> = 1 to 4 (1 or 2 for 2-channel models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
<x> of XY<x> = 1 or 2 (1 only for 2-channel
models)
Example
:HISTORY:SEARCH:SIMPLE:TRACE 1
:HISTORY:SEARCH:SIMPLE:TRACE?
-> :HISTORY:SEARCH:SIMPLE:TRACE 1
:HISTory[:SEARch]:SIMPle:VERTical
Function Sets or queries the vertical position of the
rectangle to use in simple searching.
Syntax
:HISTory[:SEARch]:SIMPle:VERTical {<N
Rf>,<NRf>}
:HISTory[:SEARch]:SIMPle:VERTical?
<NRf> = −4to4(div)
Example
:HISTORY:SEARCH:SIMPLE:VERTICAL 1,2
:HISTORY:SEARCH:SIMPLE:VERTICAL?
-> :HISTORY:SEARCH:SIMPLE:VERTICAL 2.
000E+00,1.000E+00
:HISTory:TIME?
Function Queries the time of the source record number.
Syntax
:HISTory:TIME? {<NRf>|MINimum}
Example
:HISTORY:TIME?−100
-> :HISTORY:TIME"−10010:20:30.400"
Description Specify “MINimum” to specify the minimum record
number.
5.15 HISTory Group