YOKOGAWA DLM2000 Series User Manual

5-125
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:MATH<x>:RCOunt:THReshold<y>
Function Sets or queries the threshold level for rotary-count
computation.
Syntax
:MATH<x>:RCOunt:THReshold<y> {<NRf>|
<Voltage>|<Current>}
:MATH<x>:RCOunt:THReshold<y>?
<x> = 1 or 2 (1 only for 2-channel models)
<y> = 1 or 2
<Voltage>, <Current> = See the DLM2000
Features Guide for this information.
Example
:MATH1:RCOUNT:THRESHOLD1 1
:MATH1:RCOUNT:THRESHOLD1?
-> :MATH1:RCOUNT:THRESHOLD1 1.000E+00
:MATH<x>:SCALe?
Function Queries all scaling settings.
Syntax
:MATH<x>:SCALe?
<x> = 1 or 2 (1 only for 2-channel models)
:MATH<x>:SCALe:CENTer
Function Sets or queries a center value for manual scaling.
Syntax
:MATH<x>:SCALe:CENTer {<NRf>}
:MATH<x>:SCALe:CENTer?
<x> = 1 or 2 (1 only for 2-channel models)
<NRf>=−1.0000E+31to1.0000E+31
Example
:MATH1:SCALE:CENTER 1
:MATH1:SCALE:CENTER?
-> :MATH1:SCALE:CENTER 1.00000E+00
:MATH<x>:SCALe:MODE
Function Sets or queries a scaling mode.
Syntax
:MATH<x>:SCALe:MODE {AUTO|MANual}
:MATH<x>:SCALe:MODE?
<x> = 1 or 2 (1 only for 2-channel models)
Example
:MATH1:SCALE:MODE AUTO
:MATH1:SCALE:MODE?
-> :MATH1:SCALE:MODE AUTO
:MATH<x>:SCALe:SENSitivity
Function Sets or queries a span from the center value for
manual scaling.
Syntax
:MATH<x>:SCALe:SENSitivity {<NRf>}
:MATH<x>:SCALe:SENSitivity?
<x> = 1 or 2 (1 only for 2-channel models)
<NRf>=−1.0000E+31to1.0000E+31
Example
:MATH1:SCALE:SENSITIVITY 10
:MATH1:SCALE:SENSITIVITY?
-> :MATH1:SCALE:SENSITIVITY 10.0000E+
00
:MATH<x>:UNIT?
Function Queries all computation unit settings.
Syntax
:MATH<x>:UNIT?
<x> = 1 or 2 (1 only for 2-channel models)
:MATH<x>:UNIT[:DEFine]
Function Sets or queries a unit of computation.
Syntax
:MATH<x>:UNIT[:DEFine] {<String>}
:MATH<x>:UNIT[:DEFine]?
<x> = 1 or 2 (1 only for 2-channel models)
<String> = Up to four characters
Example
:MATH1:UNIT:DEFINE "EU"
:MATH1:UNIT:DEFINE?
-> :MATH1:UNIT:DEFINE "EU"
Description Units are applied to scale values. They never
affect the computation result.
:MATH<x>:UNIT:MODE
Function Sets or queries whether a unit of computation will
be attached automatically or manually.
Syntax
:MATH<x>:UNIT:MODE {AUTO|USERdefine}
:MATH<x>:UNIT:MODE?
<x> = 1 or 2 (1 only for 2-channel models)
Example
:MATH1:UNIT:MODE AUTO
:MATH1:UNIT:MODE?
-> :MATH1:UNIT:MODE AUTO
:MATH<x>:USERdefine?
Function Queries all user-defined computation settings.
Syntax
:MATH<x>:USERdefine?
<x> = 1 or 2 (1 only for 2-channel models)
:MATH<x>:USERdefine:AVERage?
Function Queries all averaging settings for user-defined
computation.
Syntax
:MATH<x>:USERdefine:AVERage?
<x> = 1 or 2 (1 only for 2-channel models)
Description The command affects both MATH1 and MATH2.
5.19 MATH Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English