YOKOGAWA DLM2000 Series User Manual

5-129
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:MEASure:BIT<x>:AREA2:<Parameter>:VA
Lue?
Function Queries an automatically measured value of a
logic waveform parameter in Area2.
Syntax
:MEASure:BIT<x>:AREA2:<Parameter>:VAL
ue? [{NRf}]
<x> = 1 to 8
<Parameter> = {
AVGFreq|DELay|DUTYcycle|
FREQuency|PERiod|PNUMber
}
<NRf> = See the DLM2000 Features Guide for
this information.
Example (Below is an example for the average frequency of
bit 1.)
:MEASURE:BIT1:AREA2:AVGFREQ:VALUE?
-> :MEASURE:BIT1:AREA2:AVGFREQ:
VALUE 10.0000E+03
Description • If the value is immeasurable, the DLM2000
returns “NAN” (not a number).
• The <NRf> is used to specify which iteration of
automated measurement to query the measured
value from.
• If <NRf> is set to 1, the oldest measured value
in the automated measurement memory is
queried.
• If a measured value does not exist at the
specified iteration, the DLM2000 returns “NAN”
(not a number).
• If <NRf> is omitted, the most recent measured
value is queried.
• If cyclic statistical processing for automated
measurement is being executed and <NRf> is
specified, the measured values over a cycle in
iteration <NRf> from the left of the display on
the displayed waveform is queried. If <NRf>
is omitted, the measured values over the last
cycle on the displayed waveform is queried.
:MEASure:BIT<x>:AREA2:COPY
Function Copies the on/off status of all measurement
items of a logic waveform in Area2 to all other
waveforms.
Syntax
:MEASure:BIT<x>:AREA2:COPY
<x> = 1 to 8
Example
:MEASURE:BIT1:AREA2:COPY
:MEASure:BIT<x>:AREA2:DELay?
Function Queries all of the settings for measuring the delay
between channels of a logic waveform in Area2.
Syntax
:MEASure:BIT<x>:AREA2:DELay?
<x> = 1 to 8
:MEASure:BIT<x>:AREA2:DELay:MEASure?
Function Queries all source waveform settings for
measuring the delay between channels of a logic
waveform in Area2.
Syntax
:MEASure:BIT<x>:AREA2:DELay:MEASure?
<x> = 1 to 8
:MEASure:BIT<x>:AREA2:DELay:MEASure:
COUNt
Function Sets or queries the count number of a source
waveform for measuring the delay between
channels of a logic waveform in Area2.
Syntax
:MEASure:BIT<x>:AREA2:DELay:MEASure:C
OUNt {<NRf>}
:MEASure:BIT<x>:AREA2:DELay:MEASure:C
OUNt?
<x> = 1 to 8
<NRf> = 1 to 10
Example
:MEASURE:BIT1:AREA2:DELAY:MEASURE:COU
NT 2
:MEASURE:BIT1:AREA2:DELAY:MEASURE:COU
NT?
-> :MEASURE:BIT1:AREA2:DELAY:MEASURE:
COUNT 2
:MEASure:BIT<x>:AREA2:DELay:MEASure:
SLOPe
Function Sets or queries the slope of a source waveform for
measuring the delay between channels of a logic
waveform in Area2.
Syntax
:MEASure:BIT<x>:AREA2:DELay:MEASure:S
LOPe {FALL|RISE}
:MEASure:BIT<x>:AREA2:DELay:MEASure:S
LOPe?
<x> = 1 to 8
Example
:MEASURE:BIT1:AREA2:DELAY:MEASURE:SLO
PE FALL
:MEASURE:BIT1:AREA2:DELAY:MEASURE:SLO
PE?
-> :MEASURE:BIT1:AREA2:DELAY:MEASURE:
SLOPE FALL
:MEASure:BIT<x>:AREA2:DELay:REFeren
ce?
Function Queries all reference waveform settings used to
measure the delay between the specified logic
waveform and the reference waveform in Area2.
Syntax
:MEASure:BIT<x>:AREA2:DELay:REFeren
ce?
<x> = 1 to 8
5.20 MEASure Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English