YOKOGAWA DLM2000 Series User Manual

5-139
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:MEASure:{CHANnel<x>|MATH<x>}:DELay?
Function Queries all of the settings for measuring the delay
between channels of a waveform.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:DELay?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
:MEASure:{CHANnel<x>|MATH<x>}:DELay:
MEASure?
Function Queries all of the settings for a source waveform
for measuring the delay between channels of a
waveform.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:DELay:M
EASure?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
:MEASure:{CHANnel<x>|MATH<x>}:DELay:
MEASure:COUNt
Function Sets or queries the number of edges at which
delay between channels will be measured for a
waveform.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:DELay:M
EASure:COUNt {<NRf>}
:MEASure:{CHANnel<x>|MATH<x>}:DELay:M
EASure:COUNt?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
<NRf> = 1 to 10
Example
:MEASURE:CHANNEL1:DELAY:MEASURE:COU
NT 2
:MEASURE:CHANNEL1:DELAY:MEASURE:COU
NT?
-> :MEASURE:CHANNEL1:DELAY:MEASURE:CO
UNT 2
:MEASure:{CHANnel<x>|MATH<x>}:DELay:
MEASure:SLOPe
Function Sets or queries a source waveform slope that will
be used to measure delay between channels.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:DELay:M
EASure:SLOPe {FALL|RISE}
:MEASure:{CHANnel<x>|MATH<x>}:DELay:M
EASure:SLOPe?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:MEASURE:CHANNEL1:DELAY:MEASURE:SLO
PE FALL
:MEASURE:CHANNEL1:DELAY:MEASURE:SLO
PE?
-> :MEASURE:CHANNEL1:DELAY:MEASURE:SL
OPE FALL
:MEASure:{CHANnel<x>|MATH<x>}:DELay:
REFerence?
Function Queries all reference waveform settings used
to measure the delay between the specified
waveform and the reference waveform.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:DELay:R
EFerence?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
:MEASure:{CHANnel<x>|MATH<x>}:DELay:
REFerence:COUNt
Function Sets or queries the edge count of the reference
waveform used to measure the delay between the
specified waveform and the reference waveform.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:DELay:R
EFerence:COUNt {<NRf>}
:MEASure:{CHANnel<x>|MATH<x>}:DELay:R
EFerence:COUNt?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
<NRf> = 1 to 10
Example
:MEASURE:CHANNEL1:DELAY:REFERENCE:COU
NT 2
:MEASURE:CHANNEL1:DELAY:REFERENCE:COU
NT?
-> :MEASURE:CHANNEL1:DELAY:REFERENCE:
COUNT 2
5.20 MEASure Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English