YOKOGAWA DLM2000 Series - Page 173

5-140
IM 710105-17E
:MEASure:{CHANnel<x>|MATH<x>}:DELay:
REFerence:SLOPe
Function Sets or queries the slope of the reference
waveform used to measure the delay between the
specified waveform and the reference waveform.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:DELay:R
EFerence:SLOPe {FALL|RISE}
:MEASure:{CHANnel<x>|MATH<x>}:DELay:R
EFerence:SLOPe?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:MEASURE:CHANNEL1:DELAY:REFERENCE:SLO
PE FALL
:MEASURE:CHANNEL1:DELAY:REFERENCE:SLO
PE?
-> :MEASURE:CHANNEL1:DELAY:REFERENCE:
SLOPE FALL
:MEASure:{CHANnel<x>|MATH<x>}:DELay:
REFerence:SOURce
Function Sets or queries whether the reference point for
measuring the delay between channels of a
waveform in Area2 will be set to the trigger point
or a waveform in Area2.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:DELay:R
EFerence:SOURce {TRACe|TRIGger}
:MEASure:{CHANnel<x>|MATH<x>}:DELay:R
EFerence:SOURce?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:MEASURE:CHANNEL1:DELAY:REFERENCE:SOU
RCE TRACE
:MEASURE:CHANNEL1:DELAY:REFERENCE:SOU
RCE?
-> :MEASURE:CHANNEL1:DELAY:REFERENCE:
SOURCE TRACE
:MEASure:{CHANnel<x>|MATH<x>}:DELay:
REFerence:TRACe
Function Sets or queries the reference waveform edge
used to measure the delay between the specified
waveform and the reference waveform.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:DELay:R
EFerence:TRACe {<NRf>|MATH<x>}
:MEASure:{CHANnel<x>|MATH<x>}:DELay:R
EFerence:TRACe?
<NRf> = 1 to 4 (1 or 2 for 2-channel models)
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:MEASURE:CHANNEL1:DELAY:REFERENCE:TRA
CE 2
:MEASURE:CHANNEL1:DELAY:REFERENCE:TRA
CE?
-> :MEASURE:CHANNEL1:DELAY:REFERENCE:
TRACE 2
:MEASure:{CHANnel<x>|MATH<x>}:DELay:
STATe
Function Sets or queries the on/off status and the display
format of a delay parameter.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:DELay:S
TATe {OFF|ON|DEGRee}
:MEASure:{CHANnel<x>|MATH<x>}:DELay:S
TATe?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:MEASURE:CHANNEL1:DELAY:STATE ON
:MEASURE:CHANNEL1:DELAY:STATE?
-> :MEASURE:CHANNEL1:DELAY:STATE ON
:MEASure:{CHANnel<x>|MATH<x>}:DPRoxi
mal?
Function Queries all distal, mesial, and proximal settings.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:DPRoxim
al?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
:MEASure:{CHANnel<x>|MATH<x>}:DPRoxi
mal:MODE
Function Sets or queries the distal, mesial, and proximal
point mode setting.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:DPRoxim
al:MODE {PERCent|UNIT}
:MEASure:{CHANnel<x>|MATH<x>}:DPRoxim
al:MODE?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:MEASURE:CHANNEL1:DPROXIMAL:MO
DE PERCENT
:MEASURE:CHANNEL1:DPROXIMAL:MODE?
-> :MEASURE:CHANNEL1:DPROXIMAL:MO
DE PERCENT
5.20 MEASure Group