YOKOGAWA DLM2000 Series - Page 195

5-162
IM 710105-17E
:SERialbus<x>:CANFD:SEARch:SELect
Function Sets which detected point to display in the CAN
FD bus signal search zoom window and queries
the zoom position of the detected point.
Syntax
:SERialbus<x>:CANFD:SEARch:SELect {<N
Rf>|MAXimum}
:SERialbus<x>:CANFD:SEARch:SELect?
<x> = 1 to 4
<NRf> = 0 to 49999
Example
:SERIALBUS1:CANFD:SEARCH:SELECT 1
:SERIALBUS1:CANFD:SEARCH:SELECT?
-> :SERIALBUS1:CANFD:SEARCH:SELECT 1.
500+00
Description If there are no detected points, the DLM2000
returns “NAN.”
:SERialbus<x>:CANFD:SEARch:SELect?
MAXimum
Function Queries the number of detected points in the CAN
FD bus signal search.
Syntax
:SERialbus<x>:CANFD:SEARch:SELect? {M
AXimum}
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SELE
CT? MAXIMUM
-> :SERIALBUS1:CANFD:SEARCH:SELECT 10
0
Description If there are no detected points, the DLM2000
returns “NAN.”
:SERialbus<x>:CANFD:SEARch:SETup?
Function Queries all CAN FD bus signal search condition
settings.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame?
Function Queries all CAN FD bus signal search error
settings.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:CRC
Function Sets or queries the CAN FD bus signal search
CRC error setting.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me:CRC {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me:CRC?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:CRC ON
:SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:CRC?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:EFR
AME:CRC 1
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:CRCEFactor?
Function Queries all CRC error factor settings for CAN FD
bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me:CRCEFactor?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:CRCEFactor:CRCSequence
Function Sets or queries the CRC sequence (a CRC error
factor) for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me:CRCEFactor:CRCSequence {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me:CRCEFactor:CRCSequence?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:CRCFACTOR:CRCSEQUENCE ON
:SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:CRCFACTOR:CRCSEQUENCE?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:EFR
AME:CRCFACTOR:CRCSEQUENCE 1
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:CRCEFactor:SCOunt
Function Sets or queries the Stuff Count (a CRC error
factor) for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me:CRCEFactor:SCOunt {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me:CRCEFactor:SCOunt?
<x> = 1 to 4
Example :SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:CRCEFACTOR:SCOUNT ON
:SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:CRCEFACTOR:SCOUNT?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:CRCEFACTOR:SCOUNT 1
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:FSTuff
Function Sets or queries the CAN FD bus signal search
fixed stuff error setting.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me:FSTuff {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me:FSTuff?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:FSTUFF ON
:SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:FSTUFF?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:EFR
AME:FSTUFF 1
5.24 SERialbus Group