YOKOGAWA DLM2000 Series - Page 196

5-163
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame[:MODE]
Function Sets or queries the CAN FD bus signal search
error frame setting.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me[:MODE] {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me[:MODE]?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:MODE ON
:SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:MODE?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:EFR
AME:MODE 1
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:STUFF
Function Sets or queries the CAN FD bus signal search
stuff error setting.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me:STUFF {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup:EFRa
me:STUFF?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:STUFF ON
:SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:STUFF?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:EFR
AME:STUFF 1
:SERialbus<x>:CANFD:SEARch:SETup:FDF
:CONDition
Function Sets or queries the CAN FD bus signal search
FDF condition setting.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:FDF:
CONDition {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup:FDF:
CONDition?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:FDF:CO
NDITION ON
:SERIALBUS1:CANFD:SEARCH:SETUP:FDF:CO
NDITION?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:FDF
:CONDITION 1
Description When set to ON, CAN FD frames are searched.
When set to OFF, CAN frames are searched.
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]?
Function Queries all ID and data condition settings for CAN
FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:ACK?
Function Queries all ACK settings for the ID and data
conditions for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:ACK?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:ACK:MODE
Function Sets or queries the ACK mode, which is one of
the ID and data conditions, for CAN FD bus signal
searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:ACK:MODE {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:ACK:MODE?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:ACK:MODE ON
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:ACK:MODE?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:IDD
ATA:ACK:MODE 1
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:ACK:TYPE
Function Sets or queries the ACK condition, which is one of
the ID and data conditions, for CAN FD bus signal
searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:ACK:TYPE {ACK|ACKBoth|NONack}
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:ACK:TYPE?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:ACK:TYPE ACK
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:ACK:TYPE?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:IDD
ATA:ACK:TYPE ACK
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:DATA?
Function Queries all data settings for the ID and data
conditions for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:DATA?
<x> = 1 to 4
5.24 SERialbus Group