YOKOGAWA DLM2000 Series - Page 278

5-245
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:MODE
Function Sets or queries the indicator enable/disable
condition, which is one of the ID and data
conditions, for FLEXRAY bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay[:IDData]:INDIcator:
MODE {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay[:IDData]:INDIcator:MODE?
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:INDI
CATOR:MODE ON
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:INDI
CATOR:MODE?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:I
NDICATOR:MODE 1
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:NFRame
Function Sets or queries the indicator null frame, which is
one of the ID and data conditions, for FLEXRAY
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay[:IDData]:INDIcator:NFRame {0|1|X}
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay[:IDData]:INDIcator:NFRame?
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:INDI
CATOR:NFRAME 1
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:INDI
CATOR:NFRAME?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:I
NDICATOR:NFRAME 1
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:PPReamble
Function Sets or queries the indicator payload preamble,
which is one of the ID and data conditions, for
FLEXRAY bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay[:IDData]:INDIcator:PPReamble {0|1|
X}
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay[:IDData]:INDIcator:PPReamble?
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:INDI
CATOR:PPREAMBLE 1
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:INDI
CATOR:PPREAMBLE?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:I
NDICATOR:PPREAMBLE 1
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:STFRame
Function Sets or queries the indicator start frame, which is
one of the ID and data conditions, for FLEXRAY
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay[:IDData]:INDIcator:STFRame {0|1|X}
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay[:IDData]:INDIcator:STFRame?
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:INDI
CATOR:STFRAME 1
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:INDI
CATOR:STFRAME?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:I
NDICATOR:STFRAME 1
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:INDIcator:SYFRame
Function Sets or queries the indicator sync frame, which is
one of the ID and data conditions, for FLEXRAY
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay[:IDData]:INDIcator:SYFRame {0|1|X}
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay[:IDData]:INDIcator:SYFRame?
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:INDI
CATOR:SYFRAME 1
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:INDI
CATOR:SYFRAME?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:I
NDICATOR:SYFRAME 1
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray:IDOR?
Function Queries all OR condition settings for FLEXRAY
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay:IDOR?
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray:IDOR:ID<x>?
Function Queries all the settings of the frame IDs, which are
OR conditions, for FLEXRAY bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay:IDOR:ID<x>?
<x> = 1 to 4
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray:IDOR:ID<x>:CCOunt?
Function Queries the cycle-count setting for the frame IDs
for FLEXRAY bus signal triggering (this is one of
the OR conditions).
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEXr
ay:IDOR:ID<x>:CCOunt?
<x> = 1 to 4
5.33 TRIGger Group