YOKOGAWA DLM2000 Series User Manual

5-256
IM 710105-17E
:TRIGger{[:ATRigger]|:BTRigger}:LIN:
IDOR:IDENtifier:PFORmat
Function Sets or queries the ID input format, which is one of
the IDOR conditions, for LIN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:LIN:I
DOR:IDENtifier:PFORmat {BINary|HEXa}
:TRIGger{[:ATRigger]|:BTRigger}:LIN:I
DOR:IDENtifier:PFORmat?
Example
:TRIGGER:ATRIGGER:LIN:IDOR:
IDENTIFIER:PFORMAT BINARY
:TRIGGER:ATRIGGER:LIN:IDOR:
IDENTIFIER:PFORMAT?
-> :TRIGGER:ATRIGGER:LIN:IDOR:IDENTIF
IER:PFORMAT BINARY
:TRIGger{[:ATRigger]|:BTRigger}:LIN:
MODE
Function Sets or queries the LIN bus signal trigger mode
setting.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:LIN:M
ODE {BSYNch|ERRor|IDData|IDOR}
:TRIGger{[:ATRigger]|:BTRigger}:LIN:M
ODE?
Example
:TRIGGER:ATRIGGER:LIN:MODE BSYNCH
:TRIGGER:ATRIGGER:LIN:MODE?
-> :TRIGGER:ATRIGGER:LIN:MODE BSYNCH
:TRIGger{[:ATRigger]|:BTRigger}:LIN:
SOURce
Function Sets or queries the LIN bus signal trigger source
signal.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:LIN:S
OURce {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:LIN:S
OURce?
<NRf> = 1 to 4
Example
:TRIGGER:ATRIGGER:LIN:SOURCE 1
:TRIGGER:ATRIGGER:LIN:SOURCE?
-> :TRIGGER:ATRIGGER:LIN:SOURCE 1
:TRIGger{[:ATRigger]|:BTRigger}:LIN:
SPOint
Function Sets or queries the LIN bus signal trigger sample
point.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:LIN:S
POint {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:LIN:S
POint?
<NRf> = 18.8 to 90.6
Example
:TRIGGER:ATRIGGER:LIN:SPOINT 18.8
:TRIGGER:ATRIGGER:LIN:SPOINT?
-> :TRIGGER:ATRIGGER:LIN:SPOINT 18.8
:TRIGger{[:ATRigger]|:BTRigger}:PATT
ern?
Function Queries all state trigger settings.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:PATTe
rn?
:TRIGger{[:ATRigger]|:BTRigger}:PATT
ern:BITS?
Function Queries all logic input settings for state triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:PATTe
rn:BITS?
:TRIGger{[:ATRigger]|:BTRigger}:PATT
ern:BITS:HEXa
Function Sets the logic input state for state triggering in
hexadecimal notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:PATTe
rn:BITS:HEXa {<String>}
Example
:TRIGGER:ATRIGGER:PATTERN:BITS:
HEXA "A0"
:TRIGger{[:ATRigger]|:BTRigger}:PATT
ern:BITS:PATTern
Function Sets or queries the logic input state pattern for
state triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:PATTe
rn:BITS:PATTern {<String>}
:TRIGger{[:ATRigger]|:BTRigger}:PATTe
rn:BITS:PATTern?
Example
:TRIGGER:ATRIGGER:PATTERN:BITS:PATTE
RN "10011100"
:TRIGGER:ATRIGGER:PATTERN:BITS:PATTE
RN?
-> :TRIGGER:ATRIGGER:PATTERN:BITS:PAT
TERN "10011100"
:TRIGger{[:ATRigger]|:BTRigger}:PATT
ern:CHANnel<x>
Function Sets or queries the state of a channel for state
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:PATTe
rn:CHANnel<x> {DONTcare|HIGH|IN|LOW|O
FF|OUT}
:TRIGger{[:ATRigger]|:BTRigger}:PATTe
rn:CHANnel<x>?
<x> = 1 to 4
Example
:TRIGGER:ATRIGGER:PATTERN:CHANNEL1 DO
NTCARE
:TRIGGER:ATRIGGER:PATTERN:CHANNEL1?
-> :TRIGGER:ATRIGGER:PATTERN:CHANNEL
1 DONTCARE
Description Select
{IN|OFF|OUT}
when
:TRIGGER:SOURC
E:CHANNEL<x>:WINDOW ON
is specified. Select
{DONTcare|HIGH|LOW}
otherwise.
5.33 TRIGger Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English