YOKOGAWA DLM2000 Series - Page 292

5-259
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:SLOPe
Function Sets or queries trigger source trigger slope (the
polarity when window is set to ON) for edge
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:SLOPe {ENTer|EXIT|FALL|RISE}
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:SLOPe?
Example
:TRIGGER:ATRIGGER:SIMPLE:SLOPE ENTER
:TRIGGER:ATRIGGER:SIMPLE:SLOPE?
-> :TRIGGER:ATRIGGER:SIMPLE:SLOPE ENT
ER
Description • You cannot use this command when the trigger
source is set to LINE.
• Select
{ENTer|EXIT}
when
:TRIGGER:SOU
RCE:CHANNEL<x>:WINDOW ON
is specified.
Select
{FALL|RISE}
otherwise.
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:SOURce
Function Sets or queries the edge trigger source.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:SOURce {<NRf>|EXTernal|LINE|
BIT<x>}
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:SOURce?
<NRf> = 1 to 4 (1 or 2 for 2-channel models)
<x> of BIT<x> = 1 to 8
Example
:TRIGGER:ATRIGGER:SIMPLE:SOURCE 1
:TRIGGER:ATRIGGER:SIMPLE:SOURCE?
-> :TRIGGER:ATRIGGER:SIMPLE:SOURCE 1
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:WIDTh
Function Sets or queries the edge trigger source window
width.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:WIDTh {<Voltage>}
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:WIDTh?
<Voltage> = See the DLM2000 Features Guide for
this information.
Example
:TRIGGER:ATRIGGER:SIMPLE:WIDTH 1V
:TRIGGER:ATRIGGER:SIMPLE:WIDTH?
-> :TRIGGER:ATRIGGER:SIMPLE:WIDTH 1.0
00E+00
Description You cannot use this command when the trigger
source is set to EXTernal, LINE, or LOGIC.
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:WINDow
Function Sets or queries the edge trigger source window.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:WINDow {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:WINDow?
Example
:TRIGGER:ATRIGGER:SIMPLE:WINDOW ON
:TRIGGER:ATRIGGER:SIMPLE:WINDOW?
-> :TRIGGER:ATRIGGER:SIMPLE:WINDOW 1
Description You cannot use this command when the trigger
source is set to EXTernal, LINE, or LOGIC.
:TRIGger{[:ATRigger]|:BTRigger}:SPAT
tern?
Function Queries all user-defined bus signal trigger
settings.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SPATt
ern?
:TRIGger{[:ATRigger]|:BTRigger}:SPAT
tern:BITSize
Function Sets or queries the bit length setting for user-
defined bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SPATt
ern:BITSize {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:SPATt
ern:BITSize?
<NRf> = 1 to 128
Example
:TRIGGER:ATRIGGER:SPATTERN:BITSIZE 1
:TRIGGER:ATRIGGER:SPATTERN:BITSIZE?
-> :TRIGGER:ATRIGGER:SPATTERN:BITSI
ZE 1
TRIGger{[:ATRigger]|:BTRigger}:SPATt
ern:BRATe
Function Sets or queries the bit rate setting for user-defined
bus signal triggering.
Syntax
:TRIGger:ATRigger:SPATtern:BRA
Te {<NRf>}
:TRIGger:ATRigger:SPATtern:BRATe?
<NRf> = 1000 to 49500000
Example
:TRIGGER:ATRIGGER:SPATTERN:BRATE 1000
:TRIGGER:ATRIGGER:SPATTERN:BRATE?
-> :TRIGGER:ATRIGGER:SPATTERN:BRA
TE 1000
:TRIGger{[:ATRigger]|:BTRigger}:SPAT
tern:CLOCk?
Function Queries all clock signal settings for user-defined
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SPATt
ern:CLOCk?
5.33 TRIGger Group