YOKOGAWA DLM2000 Series User Manual

5-258
IM 710105-17E
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:COUPling
Function Sets or queries the edge trigger source trigger
coupling.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:COUPling {AC|DC}
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:COUPling?
Example
:TRIGGER:ATRIGGER:SIMPLE:COUPLING AC
:TRIGGER:ATRIGGER:SIMPLE:COUPLING?
-> :TRIGGER:ATRIGGER:SIMPLE:
COUPLING AC
Description You cannot use this command when the trigger
source is set to EXTernal, LINE, or LOGIC.
:TRIGger{[:ATRigger]|:BTR
igger}:SIMPle:HFRejection
(HighFrequencyREJECTION)
Function Sets or queries the on/off status of the trigger
source low-pass filter (HF rejection) for edge
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:HFRejection {<Frequency>|OFF}
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:HFRejection?
<Frequency> = 15 kHz to 20MHz
Example
:TRIGGER:ATRIGGER:SIMPLE:
HFREJECTION 15KHZ
:TRIGGER:ATRIGGER:SIMPLE:HFREJECTION?
-> :TRIGGER:ATRIGGER:SIMPLE:HFREJECTI
ON 15000
Description You cannot use this command when the trigger
source is set to EXTernal, LINE, or LOGIC.
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:HYSTeresis
Function Sets or queries the noise rejection setting for the
edge trigger source trigger level.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:HYSTeresis {HIGH|LOW}
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:HYSTeresis?
Example
:TRIGGER:ATRIGGER:SIMPLE:HYSTERES
IS HIGH
:TRIGGER:ATRIGGER:SIMPLE:HYSTERESIS?
-> :TRIGGER:ATRIGGER:SIMPLE:HYSTERES
IS HIGH
Description You cannot use this command when the trigger
source is set to EXTernal, LINE, or LOGIC.
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:LEVel
Function Sets or queries the edge trigger source trigger
level.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:LEVel {<Voltage>}
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:LEVel?
<Voltage> = See the DLM2000 Features Guide for
this information.
Example
:TRIGGER:ATRIGGER:SIMPLE:LEVEL 0V
:TRIGGER:ATRIGGER:SIMPLE:LEVEL?
-> :TRIGGER:ATRIGGER:SIMPLE:
LEVEL 0.000E+00
Description • You cannot use this command when the trigger
source is set to LINE, or LOGIC.
• When the probe type is set to current, this
command sets or queries the <Current> value.
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:PROBe
Function Sets or queries the external trigger source probe
setting for edge triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:PROBe {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:PROBe?
<NRf> = 1 to 10
Example
:TRIGGER:ATRIGGER:SIMPLE:PROBE 1
:TRIGGER:ATRIGGER:SIMPLE:PROBE?
-> :TRIGGER:ATRIGGER:SIMPLE:PROBE 1
Description You can only use this command when the trigger
source is set to EXTernal.
:TRIGger{[:ATRigger]|:BTRigger}:SIMP
le:RANGe
Function Sets or queries the external trigger source input
range for edge triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:RANGe {<Voltage>}
:TRIGger{[:ATRigger]|:BTRigger}:SIMPl
e:RANGe?
<Voltage> = 1 to 100 (V)
Example
:TRIGGER:ATRIGGER:SIMPLE:RANGE 1V
:TRIGGER:ATRIGGER:SIMPLE:RANGE?
-> :TRIGGER:ATRIGGER:SIMPLE:RANGE 1.0
E+00
Description • You can only use this command when the
trigger source is set to EXTernal.
• This command can be used on the DLM2022,
DLM2032, and DLM2052.
5.33 TRIGger Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English