YOKOGAWA DLM2000 Series User Manual

5-267
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:TRIGger[:ATRigger]:CANFD:DBRate
Function Sets or queries the CAN FD bus signal trigger
data phase bit rate (data transfer rate).
Syntax
:TRIGger[:ATRigger]:CANFD:DBRa
te {<NRf>|USER,<NRf>}
:TRIGger[:ATRigger]:CANFD:DBRate?
<NRf> = 500000, 1000000, 2000000, 4000000,
5000000, 8000000
USER <NRf> = 250000 to 10000000
(resolution:100)
Example
:TRIGGER:ATRIGGER:CANFD:DBRATE 100000
0
:TRIGGER:ATRIGGER:CANFD:DBRATE?
-> :TRIGGER:ATRIGGER:CANFD:DBRATE 500
0000
:TRIGger[:ATRigger]:CANFD:DSPoint
Function Sets or queries the CAN FD bus signal trigger
data phase sample point.
Syntax
:TRIGger[:ATRigger]:CANFD:DSPoint {<N
Rf>}
:TRIGger[:ATRigger]:CANFD:DSPoint?
<NRf> = 18.8 to 90.6 (resolution:0.1)
Example
:TRIGGER:ATRIGGER:CANFD:DSPOINT 18.8
:TRIGGER:ATRIGGER:CANFD:DSPOINT?
-> :TRIGGER:ATRIGGER:CANFD:DSPOINT 18
.8
:TRIGger[:ATRigger]:CANFD:ID?
Function Queries all ID and data condition settings for CAN
FD bus signal triggering.
Syntax
:TRIGger[:ATRigger]:CANFD:ID?
:TRIGger[:ATRigger]:CANFD[:ID]:DATA:
MODE
Function Sets or queries the data enable/disable condition,
which is one of the ID conditions, for CAN FD bus
signal triggering.
Syntax
:TRIGger[:ATRigger]:CANFD[:ID]:DATA:M
ODE {<Boolean>}
:TRIGger[:ATRigger]:CANFD[:ID]:DATA:M
ODE?
Example
:TRIGGER:ATRIGGER:CANFD:ID:DATA:MO
DE ON
:TRIGGER:ATRIGGER:CANFD:ID:DATA:MODE?
-> :TRIGGER:ATRIGGER:CANFD:ID:DATA:MO
DE 1
:TRIGger[:ATRigger]:CANFD[:ID]:IDENt
ifier?
Function Queries all identifier settings for the ID conditions
for CAN FD bus signal triggering.
Syntax
:TRIGger[:ATRigger]:CANFD[:ID]:IDENti
fier?
:TRIGger[:ATRigger]:CANFD[:ID]:IDENt
ifier:ID?
Function Queries all ID settings for the ID conditions for
CAN FD bus signal triggering.
Syntax
:TRIGger[:ATRigger]:CANFD[:ID]:IDENti
fier:ID?
:TRIGger[:ATRigger]:CANFD[:ID]:IDENt
ifier:ID:HEXa
Function Sets the ID value, which is one of the ID
conditions, for CAN FD bus signal triggering in
hexadecimal notation.
Syntax
:TRIGger[:ATRigger]:CANFD[:ID]:IDENti
fier:ID:HEXa {<String>}
Example
:TRIGGER:ATRIGGER:CANFD:ID:IDENTIFIER
:ID:HEXA "1AB"
:TRIGger[:ATRigger]:CANFD[:ID]:IDENt
ifier:ID:MODE
Function Sets or queries the ID enable/disable condition,
which is one of the ID conditions, for CAN FD bus
signal triggering.
Syntax
:TRIGger[:ATRigger]:CAN[:ID]:IDENtifi
er:ID:MODE {<Boolean>}
:TRIGger[:ATRigger]:CANFD[:ID]:IDENti
fier:ID:MODE?
Example
:TRIGGER:ATRIGGER:CANFD:ID:
IDENTIFIER:ID:MODE ON
:TRIGGER:ATRIGGER:CANFD:ID:
IDENTIFIER:ID:MODE?
-> :TRIGGER:ATRIGGER:CANFD:ID:IDENTIF
IER:ID:MODE 1
:TRIGger[:ATRigger]:CANFD[:ID]:IDENt
ifier:ID:PATTern
Function Sets or queries the ID condition, which is one of
the ID conditions, for CAN FD bus signal triggering
in binary notation.
Syntax
:TRIGger[:ATRigger]:CANFD[:ID]:IDENti
fier:ID:PATTern {<String>}
:TRIGger[:ATRigger]:CANFD[:ID]:IDENti
fier:ID:PATTern?
Example
:TRIGGER:ATRIGGER:CANFD:ID:
IDENTIFIER:ID:PATTERN "11100001111"
:TRIGGER:ATRIGGER:CANFD:ID:
IDENTIFIER:ID:PATTERN?
-> :TRIGGER:ATRIGGER:CANFD:ID:IDENTIF
IER:ID:PATTERN "11100001111"
5.33 TRIGger Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English