YOKOGAWA DLM2000 Series - Page 299

5-266
IM 710105-17E
:TRIGger{[:ATRigger]|:BTRigger}:UART
:ERRor:PARity
Function Sets or queries the UART signal trigger parity
error setting.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
ERRor:PARity {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
ERRor:PARity?
Example
:TRIGGER:ATRIGGER:UART:ERROR:PARI
TY ON
:TRIGGER:ATRIGGER:UART:ERROR:PARITY?
-> :TRIGGER:ATRIGGER:UART:ERROR:PARI
TY 1
:TRIGger{[:ATRigger]|:BTRigger}:UART
:ERRor:PMODE
Function Sets or queries the UART signal trigger parity
mode setting.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
ERRor:PMODE {EVEN|ODD}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
ERRor:PMODE?
Example
:TRIGGER:ATRIGGER:UART:ERROR:PMO
DE EVEN
:TRIGGER:ATRIGGER:UART:ERROR:PMODE?
-> :TRIGGER:ATRIGGER:UART:ERROR:PMO
DE EVEN
:TRIGger{[:ATRigger]|:BTRigger}:UART
:FORMat
Function Sets or queries the UART signal trigger format.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
FORMat {BIT7Parity|BIT8Parity|BIT8Nop
arity}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
FORMat?
Example
:TRIGGER:ATRIGGER:UART:FORMAT BIT7PAR
ITY
:TRIGGER:ATRIGGER:UART:FORMAT?
-> :TRIGGER:ATRIGGER:UART:FORMAT BIT7
PARITY
:TRIGger{[:ATRigger]|:BTRigger}:UART
:MODE
Function Sets or queries the UART signal trigger type.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
MODE {DATA|EDATa|ERRor}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
MODE?
Example
:TRIGGER:ATRIGGER:UART:MODE DATA
:TRIGGER:ATRIGGER:UART:MODE?
-> :TRIGGER:ATRIGGER:UART:MODE DATA
:TRIGger{[:ATRigger]|:BTRigger}:UART
:POLarity
Function Sets or queries the UART signal trigger polarity.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
POLarity {NEGative|POSitive}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
POLarity?
Example
:TRIGGER:ATRIGGER:UART:POLARITY NEGAT
IVE
:TRIGGER:ATRIGGER:UART:POLARITY?
-> :TRIGGER:ATRIGGER:UART:POLARITY NE
GATIVE
:TRIGger{[:ATRigger]|:BTRigger}:UART
:SOURce
Function Sets or queries the source signal for UART signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
SOURce {<NRf>|BIT<x>}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
SOURce?
<NRf> = 1 to 4
<x> of BIT<x> = 1 to 8
Example
:TRIGGER:ATRIGGER:UART:SOURCE 1
:TRIGGER:ATRIGGER:UART:SOURCE?
-> :TRIGGER:ATRIGGER:UART:SOURCE 1
:TRIGger{[:ATRigger]|:BTRigger}:UART
:SPOint
Function Sets or queries the UART signal trigger sample
point.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
SPOint {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
SPOint?
<NRf> = 18.8 to 90.6
Example
:TRIGGER:ATRIGGER:UART:SPOINT 18.8
:TRIGGER:ATRIGGER:UART:SPOINT?
-> :TRIGGER:ATRIGGER:UART:SPOINT 18.8
:TRIGger[:ATRigger]:CANFD?
Function Queries all CAN FD bus signal trigger settings.
Syntax
:TRIGger[:ATRigger]:CANFD?
:TRIGger[:ATRigger]:CANFD:BRATe
Function Sets or queries the CAN FD bus signal trigger bit
rate (data transfer rate).
Syntax
:TRIGger[:ATRigger]:CANFD:BRATe {<NRf
>|USER,<NRf>}
:TRIGger[:ATRigger]:CANFD:BRATe?
<NRf> = 250000, 500000, 1000000
USER <NRf> = 20000 to 1000000 (resolution:100)
Example
:TRIGGER:ATRIGGER:CANFD:BRATE 1000000
:TRIGGER:ATRIGGER:CANFD:BRATE?
-> :TRIGGER:ATRIGGER:CANFD:BRATE 1000
000
5.33 TRIGger Group