YOKOGAWA DLM2000 Series - Page 298

5-265
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA:CSENsitive
Function Sets or queries whether to distinguish uppercase
and lowercase letters in ASCII data for the UART
bus signal trigger.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA:CSENsitive {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA:CSENsitive?
Example
:TRIGGER:ATRIGGER:UART:DATA:CSENSITI
VE ON
:TRIGGER:ATRIGGER:UART:DATA:CSENSITI
VE?
-> :TRIGGER:ATRIGGER:UART:DATA:CSENSI
TIVE 1
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA:DBYTe
Function Sets or queries the number of data bytes for
UART signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA:DBYTe {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA:DBYTe?
<NRf> = 1 to 4 (byte)
Example
:TRIGGER:ATRIGGER:UART:DATA:DBYTE 1
:TRIGGER:ATRIGGER:UART:DATA:DBYTE?
-> :TRIGGER:ATRIGGER:UART:DATA:
DBYTE 1
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA:HEXa<x>
Function Sets the data for UART signal triggering in
hexadecimal notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA:HEXa<x> {<String>}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA:HEXa<x>?
<x> = 1 to 4
Example
:TRIGGER:ATRIGGER:UART:DATA:HE
XA1 "12"
:TRIGGER:ATRIGGER:UART:DATA:HEXA1?
-> :TRIGGER:ATRIGGER:UART:DATA:HE
XA1 "12"
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA:PATTern<x>
Function Sets or queries the data value for UART signal
triggering in binary notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA:PATTern<x> {<String>}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA:PATTern<x>?
<x> = 1 to 4
Example
:TRIGGER:ATRIGGER:UART:DATA:PATTE
RN1 "00110101"
:TRIGGER:ATRIGGER:UART:DATA:PATTERN1?
-> :TRIGGER:ATRIGGER:UART:DATA:PATTE
RN1 "00110101"
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA:PFORmat
Function Sets or queries the data input format, which is one
of the ID and data conditions, for UART signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA:PFORmat {ASCii|BINary|HEXa}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA:PFORmat?
Example
:TRIGGER:ATRIGGER:UART:DATA:PFORM
AT BINARY
:TRIGGER:ATRIGGER:UART:DATA:PFORMAT?
-> :TRIGGER:ATRIGGER:UART:DATA:PFORM
AT BINARY
:TRIGger{[:ATRigger]|:BTRigger}:UART
:ERRor?
Function Queries all UART signal trigger error settings.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
ERRor?
:TRIGger{[:ATRigger]|:BTRigger}:UART
:ERRor:FRAMing
Function Sets or queries the UART signal trigger framing
error setting.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
ERRor:FRAMing {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
ERRor:FRAMing?
Example
:TRIGGER:ATRIGGER:UART:ERROR:FRAMI
NG ON
:TRIGGER:ATRIGGER:UART:ERROR:FRAMING?
-> :TRIGGER:ATRIGGER:UART:ERROR:FRAMI
NG 1
5.33 TRIGger Group