YOKOGAWA DLM2000 Series User Manual

5-264
IM 710105-17E
:TRIGger{[:ATRigger]|:BTRigger}:SPI:
DATA<x>:SOURce
Function Sets or queries the data signal for SPI bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SPI:D
ATA<x>:SOURce {<NRf>|BIT<x>}
:TRIGger{[:ATRigger]|:BTRigger}:SPI:D
ATA<x>:SOURce?
<x> = 1 or 2
<NRf> = 1 to 4
<x> of BIT<x> = 1 to 8
Example
:TRIGGER:ATRIGGER:SPI:DATA1:SOURCE 1
:TRIGGER:ATRIGGER:SPI:DATA1:SOURCE?
-> :TRIGGER:ATRIGGER:SPI:DATA1:SOUR
CE 1
:TRIGger{[:ATRigger]|:BTRigger}:SPI:
MODE
Function Sets or queries the wiring system (three-wire or
four-wire) for SPI bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:SPI:M
ODE {WIRE3|WIRE4}
:TRIGger{[:ATRigger]|:BTRigger}:SPI:M
ODE?
Example
:TRIGGER:ATRIGGER:SPI:MODE WIRE3
:TRIGGER:ATRIGGER:SPI:MODE?
-> :TRIGGER:ATRIGGER:SPI:MODE WIRE3
:TRIGger{[:ATRigger]|:BTRigger}:TYPE
Function Sets or queries the trigger type.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:TY
PE {PATTern|WIDTh|OR|TV|SIMPle|PULSe|
QUALify|CANBus||CANFDbus|FLEXray|I2C
Bus|LINBus|PSI5|SENT|SPATtern|SPIBus
|UART}
:TRIGger{[:ATRigger]|:BTRigger}:TYPE?
Example
:TRIGGER:ATRIGGER:TYPE SIMPLE
:TRIGGER:ATRIGGER:TYPE?
-> :TRIGGER:ATRIGGER:TYPE SIMPLE
Description The settings that are available for
:TRIGger:BTRigger:TYPE
are {
PATTern|SIM
Ple|QUALify|CANBus|FLEXray|I2CBus|LIN
Bus|SPATtern|SPIBus|UART
}.
:TRIGger{[:ATRigger]|:BTRigger}:UA
RT?
Function Queries all UART signal trigger settings.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART?
:TRIGger{[:ATRigger]|:BTRigger}:UART
:BITorder
Function Sets or queries the UART signal trigger bit order.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
BITorder {LSBFirst|MSBFirst}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
BITorder?
Example
:TRIGGER:ATRIGGER:UART:BITORDER LSBFI
RST
:TRIGGER:ATRIGGER:UART:BITORDER?
-> :TRIGGER:ATRIGGER:UART:BITORDER LS
BFIRST
:TRIGger{[:ATRigger]|:BTRigger}:UART
:BRATe
Function Sets or queries the UART signal trigger bit rate
(data transfer rate).
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
BRATe {<NRf>|USER,<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
BRATe?
<NRf> = 1200, 2400, 4800, 9600, 19200
USER <NRf> = See the DLM2000 Feature Guide
for this information.
Example
:TRIGGER:ATRIGGER:UART:BRATE 2400
:TRIGGER:ATRIGGER:UART:BRATE?
-> :TRIGGER:ATRIGGER:UART:BRATE 2400
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA?
Function Queries all UART signal trigger data settings.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA?
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA:ASCii
Function Sets the UART bus signal trigger data in ASCII
format.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA:ASCii {<String>}
Example
:TRIGGER:ATRIGGER:UART:DATA:ASCII "TE
ST"
:TRIGger{[:ATRigger]|:BTRigger}:UART
:DATA:CONDition
Function Sets or queries the data comparison condition (true
or false) for UART signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA:CONDition {DONTcare|TRUE}
:TRIGger{[:ATRigger]|:BTRigger}:UART:
DATA:CONDition?
Example
:TRIGGER:ATRIGGER:UART:DATA:CONDITI
ON DONTCARE
:TRIGGER:ATRIGGER:UART:DATA:CONDITI
ON?
-> :TRIGGER:ATRIGGER:UART:DATA:CONDIT
ION DONTCARE
5.33 TRIGger Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English