YOKOGAWA WT110 User Manual

IM 253401-01E
App2-19
App
Appendix 2.3 Commands
Communication Commands 2
2.3.7 INTEGrate Group
The commands in the INTEGrate group are used to make settings relating to, and inquiries about integration. This allows you to
make the same settings and inquiries as when using the START key, STOP key, RESET key, INTEG SET key and their
corresponding menus.
:INTEGrate : MODE <Space> NORMal
CONTinuous
?
TIMer <Space> <NRf> , <NRf>
?
STARt
STOP
RESet
?
<Character string>
;
INTEGrate?
Function Queries all settings relating to integration.
Syntax INTEGrate?
Example INTEGRATE? → :INTEGRATE:MODE NORMAL;TIMER 0,0
INTEGrate:MODE
Function Sets the integration mode/queries the current setting.
Syntax INTEGrate:MODE {NORMal|CONTinuous}
INTEGrate:MODE?
Example INTEGRATE:MODE NORMAL
INTEGRATE:MODE? → :INTEGRATE:MODE NORMAL
INTEGrate:RESet
Function Resets the integrated values.
Syntax INTEGrate:RESet
Example INTEGRATE:RESET
INTEGrate:STARt
Function Starts integration.
Syntax INTEGrate:STARt
Example INTEGRATE:START
INTEGrate:STOP
Function Stops integration.
Syntax INTEGrate:STOP
Example INTEGRATE:STOP
INTEGrate:TIMer
Function Sets the integration timer/queries the current setting.
Syntax INTEGrate:TIMer {<NRf>,<NRf>|<String>}
{<NRf>,<NRf>}=0,0 to 999,59
{<String>}=HHH:MM HHH
hour MM minute
Example INTEGRATE:TIMER 10,0
INTEGRATE:TIMER “10:00“
INTEGRATE:TIMER?
→ :INTEGRATE:TIMER 10,0

YOKOGAWA WT110 Specifications

General

Brand	YOKOGAWA
Model	WT110
Category	Measuring Instruments
Language	English