IM 253401-01E
4
Safety Precautions
This instrument is a IEC safety class I instrument (provided with terminal for protective
grounding).
The following general safety precautions must be observed during all phases of operation,
service and repair of this instrument. If this instrument is used in a manner not sepecified in this
manual, the protection provided by this instrument may be impaired.
Also,YOKOGAWA Electric Corporation assumes no liability for the customer’s failure to
comply with these requirements.
The fullowing symbols are used on this instrument.
To avoid injury, death of personnel or damage to the instrument, the operator must refer to an
explanation in the User's Manual or Service Manual.
Danger, risk of electric shock
Alternating current
ON(power)
OFF(power)
In-position of a bistable push control
Out-position of a bistable push control
Ground
To Next Page
Loading...
Need help?
General
