IM 253401-01E
App2-26
Appendix 2.3 Commands
Output Example of Harmonic Analysis Data
• Output example for model 253503, after having sent the following commands. (Refer also to
page 10-19 for output example of external plotter).
(Sent)
MEASURE:HARMONICS:ITEM:PRESET VPATTERN
MEASURE:HARMONICS:VALUE?
(Received data)
60.00E+00,12.01E+00,49.98E+00,49.62E+00,0.03E+00,5.50E+00,
0.01E+00,1.99E+00,0.02E+00,1.01E+00,0.01E+00,0.62E+00,
0.00E+00,0.41E+00,0.00E+00,0.30E+00,0.00E+00,0.22E+00,
0.00E+00,0.17E+00,0.00E+00,0.14E+00,0.00E+00,0.12E+00,
0.00E+00,0.09E+00,0.00E+00,0.08E+00,0.00E+00,0.07E+00,
0.01E+00,0.06E+00,0.00E+00,0.05E+00,0.00E+00,0.04E+00,
0.00E+00,0.05E+00,0.00E+00,0.03E+00,0.00E+00,0.03E+00,
0.01E+00,0.03E+00,0.00E+00,0.03E+00,0.00E+00,0.02E+00,
0.00E+00,0.02E+00,0.00E+00,0.02E+00,0.00E+00,0.06E+00,
11.09E+00,0.02E+00,4.01E+00,0.03E+00,2.03E+00,0.01E+00,
1.24E+00,0.01E+00,0.82E+00,0.01E+00,0.60E+00,0.00E+00,
0.45E+00,0.01E+00,0.35E+00,0.01E+00,0.28E+00,0.00E+00,
0.23E+00,0.01E+00,0.19E+00,0.01E+00,0.16E+00,0.01E+00,
0.14E+00,0.01E+00,0.11E+00,0.01E+00,0.10E+00,0.01E+00,
0.08E+00,0.01E+00,0.09E+00,0.01E+00,0.07E+00,0.00E+00,
0.06E+00,0.01E+00,0.06E+00,0.01E+00,0.05E+00,0.01E+00,
0.05E+00,0.01E+00,0.05E+00,0.01E+00,0.04E+00,0.01E+00
(Data contents) Frequency of PLL source :
60.00E+00 (Hz)
Harmonic distortion factor of voltage :
12.01E+00 (%)
Rms value of 1st to 50th order :
49.98E+00 (V)
Fundamental analysis value (1st order) :
49.62E+00 (V)
Harmonic analysis value (2nd order) :
0.03E+00 (V)
::
Harmonic analysis value (50th order) :
0.00E+00 (V)
Harmonic relative content (2nd order) :
0.06E+00 (%)
::
Harmonic relative content (50th order) :
0.01E+00 (%)
The data consist of 102 items in total.
To Next Page
Loading...
