EasyManua.ls Logo

Zanotti un0 080 - Expansion Tank; Replacement Procedure

Zanotti un0 080
248 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
01
4.3 Cooling System
Diesel Engine
(c)
Remove part of engine coolant avoiding big drain.
CAUTION! Wait that coolant is not dangerously
hot.
(d)
Dismount water pump topper flange releasing
therm
o
stat.
(e)
Replace thermostat and close water pump
assembly.
CAUTION!
Tightening torque:
(f)
Refill engine coolant from expansion tank.
CAUTION! Securely tighten cooling system filler
cap.
Expansion Tank
Waster is incompressible thus prevent pressure damage engine cooling system is provided of expansion tank allowing vapor
and air to expand here.
Replacement Procedure
Individual Protection Devices
Goggles
Gloves
(a)
Switch off and disconnect unit from electrical supplies (Battery and Main).
(b)
Open unit top cover.
(c)
Remove part of engine coolant avoiding big drain.
CAUTION! Wait that coolant is not dangerously
hot.
(d)
Disconnect expansion tank from hoses.
(e)
Replace expansion tank.
(f)
Reconnect coolant hoses.

Table of Contents