69
3.8 Oil Separator
Cooling Circuit
3.8 Oil Separator
Oil is required in a cooling system just by c
ompressors to prevent seize due to friction and thermal expansion. Oil separator is
equipped on Zer0o range as a standard, it increases compressor life ensuring a good lubrication. Oil, as particulate, is
entrained into refrigerant gas coming from compressor, oil separator divides, collects and returns oil to compressors.
Oil separator replacement
Individual Protection Devices
Goggles, Gloves, Vest
(a)
Open unit top cover.
(b)
Open unit bottom cover.
(c)
Recover refrigerant 3.2.2 Section.
(d)
Ensure that all unit valves are
closed.
(e)
Disconnect unit from electrical
supplies (Battery and Main).
To Next Page
Loading...
