79
3.10 Alternative Road
Compressor
Cooling Circuit
Road Compressor Replacement
(a)
Disconnect unit from all electrical supplies
(Electrical main and Battery).
(b)
Open unit cover door.
(c)
Remove bottom cover.
(d)
Shut off both compressors oil line and road
suction and di
scharge
CAUTION
!
Shut off both com- pressors1 oil line
valves, avoiding oil dripping.
WARNING
!
Recover compressor residual pressure
by a
service port.
(e)
Disconnect valve flanges from road compressor.
(f)
Remove compressor base bolts.
CAUTION
!
Do not unscrew or remove
comp
ressor support bolts.
To Next Page
