Zanotti un0 080 - Page 91

80
Cooling Circuit
3.10 Alternative Road
Compresso
r
(g) Remove bolts from bell- housing (q.ty 8)in a
diametrically opposite sequence.
(h) Sliding back compressor and bell-housing
assembly from engine flange
.
(i) Using a lifter remove compressor.
(j) Disconnect junction
hub from compress
or
unscrewing drive shaft
screw.
(k) Remove bell-housing
from c
ompressor.
CAUTION
! Unscrew in
a diametrically opposite
sequence.