Zanotti un0 080 - Filter Drier Replacement

56
Cooling Circuit
3.4 Filter Drier an
d Sight
Glass
Filter Drier Replacement
Individual Protection Devices
Goggles, Gloves, Vest
(a) Recover refrigerant following
procedure of 3.2.2 sectio
n.
CAUT
ION
! Ensure that cooling
LP
circuit is completely purged.
(b) Switch off and disconnect unit from electrical supplies (Battery and Main).
(c) Unscrew Filter Drier and Sight
Glass 22mm n
u
ts holding filter
with 19mm w
rench.
(d) Relase filter drier from clamps.
(e) Remove and replace Filter Drier
and Sight Glas
s.
CAUT
ION
! Pay attention to filter
flux direction.
CAUTION
! When replacing Drier
Filter best pra
ctice is to replace Orifice
too.