71
3.8 Oil Separator
Cooling Circuit
(m)
Braze new oil separator in
position.
(n)
Clamp liquid injection thermostat
to inlet tube coming from scroll
comp
ress
or.
(o)
Re-install service port valves.
CAUTION
!
Check condition and
eventually r
eplace.
(p)
Re-install pressure switches.
(q)
Open all unit valves and Vac- uum
unit 3.2.3 Section.
(r)
Connect a vacuum gauge and
check for
leaks after
a waiting
time 3.2.5 Sec
tion.
(s)
Charge unit with refrigerant
3.2.4 Section.
To Next Page
Loading...
