73
3.9 Scroll Stand-by
Compressor
Cooling Circuit
(e)
Purge from LP service port.
(f)
Holding body disconnect injection
valve.
(g)
Remove sensing bulb.
(h)
Replace valve holding body while
screwing.
CAUTION
!
A 90° orientation on
the valve is recommended.
CAUTION
!
Sensing bulb capillary
should not contact the compressor
during operation.
(i)
Vacuum contaminated parts of
cooling Circuit and check
installation for leaks.
(j)
Reopen valves.
To Next Page
Loading...
