Zebra DS4308 - Page 384

A - 6 DS3408 Product Reference Guide
Code 39
Code 39 00h Enable 13-32
Trioptic Code 39 0Dh Disable 13-32
Convert Code 39 to Code 32
(Italian Pharmacy Code)
56h Disable 13-33
Code 32 Prefix E7h Disable 13-33
Set Length(s) for Code 39 12h 13h 2 to 55 13-34
Code 39 Check Digit Verification 30h Disable 13-35
Transmit Code 39 Check Digit 2Bh Disable 13-36
Code 39 Full ASCII Conversion 11h Disable 13-37
Buffer Code 39 71h Disable 13-38
Code 93
Code 93 09h Disable 13-40
Set Length(s) for Code 93 1Ah 1Bh 4 to 55 13-41
Code 11
Code 11 0Ah Disable 13-43
Set Lengths for Code 11 1Ch 1Dh 4 to 55 13-44
Code 11 Check Digit Verification 34h Disable 13-46
Transmit Code 11 Check Digit(s) 2Fh Disable 13-47
Interleaved 2 of 5 (ITF)
Interleaved 2 of 5 (ITF) 06h Enable 13-47
Set Lengths for I 2 of 5 16h 17h 14 13-48
I 2 of 5 Check Digit Verification 31h Disable 13-49
Transmit I 2 of 5 Check Digit 2Ch Disable 13-50
Convert I 2 of 5 to EAN 13 52h Disable 13-50
Discrete 2 of 5 (DTF)
Discrete 2 of 5 05h Disable 13-51
Set Length(s) for D 2 of 5 14h 15h 12 13-52
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.