Zebra DS4308 Reference Guide

Standard Default Parameters A - 5
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
F1h 43h
F1h 44h
13-14
UPC/EAN/JAN Supplemental Redundancy 50h 10 13-14
UPC/EAN/JAN Supplemental AIM ID
Format
F1h A0h Combined 13-15
Transmit UPC-A Check Digit 28h Enable 13-16
Transmit UPC-E Check Digit 29h Enable 13-16
Transmit UPC-E1 Check Digit 2Ah Enable 13-17
UPC-A Preamble 22h System Character 13-18
UPC-E Preamble 23h System Character 13-19
UPC-E1 Preamble 24h System Character 13-20
Convert UPC-E to A 25h Disable 13-21
Convert UPC-E1 to A 26h Disable 13-22
EAN-8/JAN-8 Extend 27h Disable 13-22
Bookland ISBN Format F1h 40h ISBN-10 13-23
UCC Coupon Extended Code 55h Disable 13-24
Coupon Report F1h DAh Old Coupon Format 13-25
ISSN EAN F1h 69h Disable 13-26
Code 128
Code 128 08h Enable 13-26
Set Length(s) for Code 128 D1h D2h Any Length 13-27
GS1-128 (formerly UCC/EAN-128) 0Eh Enable 13-29
ISBT 128 54h Enable 13-29
ISBT Concatenation F1h 41h Disable 13-30
Check ISBT Table F1h 42h Enable 13-31
ISBT Concatenation Redundancy DFh 10 13-31
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.

Zebra DS4308 Specifications

General

Sealing	IP42
Connectivity	USB, RS232, Keyboard Wedge, TGCS (IBM) 46XX over RS485
Decode Capability	1D, 2D, PDF417
Drop Specification	Withstands multiple 1.5 m (5 ft) drops to concrete
Operating Temperature	32° to 104° F/0° to 40° C
Storage Temperature	-40° to 158° F/-40° to 70° C
Humidity	5% to 95% (non-condensing)
Weight	5.7 oz./161.9 g
Dimensions	6.5 in. H x 2.6 in. W x 3.6 in. D 16.5 cm H x 6.6 cm W x 9.1 cm D