Zebra DS4308 Reference Guide

A - 4 DS3408 Product Reference Guide
Ignore Unknown Characters Ignore 10-6
Convert All Bar Codes to Code 39 Disable 10-7
Convert Code 39 to Full ASCII Disable 10-8
Undecoded Scanner Emulation
Beep Style Beep on Successful Transmit 11-5
Parameter Pass-Through Parameter Process and Pass
Through
11-6
Convert Newer Code Types Convert Newer Code Types 11-7
Module Width 20 µs 11-8
Convert All Bar Codes to Code 39 Do Not Convert to Code 39 11-8
Code 39 Full ASCII Conversion Disable 11-9
Transmission Timeout 3 seconds 11-10
Ignore Unknown Characters Ignore Unknown Characters 11-11
Leading Margin 2 ms 11-12
Check for Decode LED Check for Decode LED 11-13
123Scan Configuration Tool
123Scan Configuration
None
1
12-1
Disable All Code Types 13-7
UPC/EAN
UPC-A 01h Enable 13-8
UPC-E 02h Enable 13-8
UPC-E1 0Ch Disable 13-9
EAN-8/JAN 8 04h Enable 13-9
EAN-13/JAN 13 03h Enable 13-10
Bookland EAN 53h Disable 13-10
Decode UPC/EAN/JAN Supplementals
(2 and 5 digits)
10h Ignore 13-11
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.

Zebra DS4308 Specifications

General

Sealing	IP42
Connectivity	USB, RS232, Keyboard Wedge, TGCS (IBM) 46XX over RS485
Decode Capability	1D, 2D, PDF417
Drop Specification	Withstands multiple 1.5 m (5 ft) drops to concrete
Operating Temperature	32° to 104° F/0° to 40° C
Storage Temperature	-40° to 158° F/-40° to 70° C
Humidity	5% to 95% (non-condensing)
Weight	5.7 oz./161.9 g
Dimensions	6.5 in. H x 2.6 in. W x 3.6 in. D 16.5 cm H x 6.6 cm W x 9.1 cm D