Standard Default Parameters A - 9
MicroQR F1h 3Dh Enable
13-85
Aztec F1h 3Eh Enable
13-86
Aztec Inverse F1h 4Dh Regular
13-86
Symbology-Specific Security Levels
Redundancy Level 4Eh 1
13-87
Security Level 4Dh 1
13-89
Intercharacter Gap Size F0h 7Dh Normal
13-90
Report Version
13-90
Macro PDF
Flush Macro PDF Buffer
13-91
Abort Macro PDF Entry
13-91
Miscellaneous Scanner Options
Transmit Code ID Character 2Dh None
14-3
Prefix Value 63h, 69h 7013 <CR><LF>
14-4
Suffix 1 Value
Suffix 2 Value
62h, 68h
64h, 6Ah
7013 <CR><LF>
14-4
Scan Data Transmission Format EBh Data as is
14-5
FN1 Substitution Values 67h, 6Dh Set
14-7
Transmit “No Read” Message 5Eh Disable
14-8
Synapse Interface F0h ACh Standard
14-9
Table A-1
Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.
To Next Page
Loading...
