Zebra DS4308 Reference Guide

5 - 2 DS3408 Product Reference Guide
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
Decoding Preferences Parameter Defaults
Table 5-1 lists defaults for digital scanner preferences parameters. To change the default values scan the
appropriate bar codes in this guide. These new values replace the standard default values in memory. To recall the
default parameter values, scan *Set Defaults on page 4-4.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 5-1 Decoding Preferences Default Table
Parameter
Parameter
Number
Default
Page
Number
Decoding Options
Focus Mode F0h A6h Far Focus 5-3
Decoding Illumination F0h 2Ah Enable 5-4
Decode Aiming Pattern F0h 32h Enable 5-4
Low Light Enhancement F1h 64h Disable 5-5
Presentation Mode Field of View F1h 61h Default (Reduced) 5-5

Zebra DS4308 Specifications

General

Brand	Zebra
Model	DS4308
Category	Barcode Reader
Language	English