Accessories 10 - 3
Single Slot USB Cradle
This section describes how to use a Single Slot USB cradle with the MC67. For USB communication setup
procedures refer to the MC67 Integrator Guide.
The Single Slot USB Cradle:
•
Provides 5.4 VDC power for operating the MC67.
•
Synchronizes information between the MC67 and a host computer. Refer to the MC67 Integrator Guide
for information on setting up a partnership between the MC67 and a host computer.
•
Charges the MC67’s battery.
•
Charges a spare battery.
Charging the MC67 Battery
Connect the cradle to power. Insert the MC67 into the slot to begin charging.
Figure 10-1
MC67 Battery Charging
Charging/Battery Status LED
To Next Page
Loading...