7 - 4 MC67 User Guide
Bluetooth Power States
Cold Boot
Performing a cold boot retain the state of the Bluetooth radio prior to the cold boot.
Warm Boot
Performing a warm boot retain the state of the Bluetooth radio prior to the warm boot.
Suspend
When there is an active Bluetooth connection, the Bluetooth radio goes into low power mode maintaining the
active connection. When there is no active connection, the Bluetooth radio turns off.
With StoneStreet One Bluetooth Stack
With Microsoft Bluetooth Stack
Resume
When the MC67 resumes, Bluetooth turns on if it was on prior to suspend.
Table 7-2
COM Ports
Microsoft Bluetooth Stack StoneStreet One Bluetooth Stack
COM5 COM5
COM9 COM9
FIP2 COM11
COM21
COM22
COM23
FIP2
NOTE If there is an active Bluetooth connection between the MC67 and another Bluetooth device, the MC67 will
not timeout. However, if the user presses the Power button on the MC67, the MC67 will suspend and
upon receiving data from a remote Bluetooth device, the MC67 will wake from suspend mode. For
example, Bluetooth scanner sending data to the MC67.
NOTE If there is an active Bluetooth connection between the MC67 and another Bluetooth device and there is
no data activity, the MC67 will timeout. However, if the user presses the Power button on the MC67, the
MC67 will suspend and upon receiving data from a remote Bluetooth device, the MC67 will wake from
suspend mode. For example, Bluetooth scanner sending data to the MC67.