EasyManuals Logo
Home>Zebra>Handhelds>MC67

Zebra MC67 User Manual

Zebra MC67
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #214 background imageLoading...
Page #214 background image
Glossary - 4 MC67 User Guide
I
IEC. International Electrotechnical Commission. This international agency regulates laser safety by specifying various
laser operation classes based on power output during operation.
IEC (825) Class 1. This is the lowest power IEC laser classification. Conformity is ensured through a software restriction
of 120 seconds of laser operation within any 1000 second window and an automatic laser shutdown if the scanner's
oscillating mirror fails.
IEEE Address. See MAC Address.
Input/Output Ports. I/O ports are primarily dedicated to passing information into or out of the terminal’s memory. MC67
mobile computers include USB ports.
Interleaved 2 of 5. A binary bar code symbology representing character pairs in groups of five bars and five
interleaved spaces. Interleaving provides for greater information density. The location of wide elements
(bar/spaces) within each group determines which characters are encoded. This continuous code type uses no
intercharacter spaces. Only numeric (0 to 9) and START/STOP characters may be encoded.
Internet Protocol Address. See IP.
I/O Ports. The connection between two devices, defined by common physical characteristics, signal characteristics, and
signal meanings. Types of interfaces include RS-232 and USB.
IP. Internet Protocol. The IP part of the TCP/IP communications protocol. IP implements the network layer (layer 3) of
the protocol, which contains a network address and is used to route a message to a different network or subnetwork.
IP accepts “packets” from the layer 4 transport protocol (TCP or UDP), adds its own header to it and delivers a
“datagram” to the layer 2 data link protocol. It may also break the packet into fragments to support the maximum
transmission unit (MTU) of the network.
IP Address. (Internet Protocol address) The address of a computer attached to an IP network. Every client and server
station must have a unique IP address. A 32-bit address used by a computer on a IP network. Client workstations
have either a permanent address or one that is dynamically assigned to them each session. IP addresses are written
as four sets of numbers separated by periods; for example, 204.171.64.2.
IPX/SPX. Internet Package Exchange/Sequential Packet Exchange. A communications protocol for Novell. IPX is
Novell’s Layer 3 protocol, similar to XNS and IP, and used in NetWare networks. SPX is Novell's version of the Xerox
SPP protocol.
ISM. Industry Scientific and Medical
K
Key. A key is the specific code used by the algorithm to encrypt or decrypt the data. Also see, Encryption and
Decrypting.

Table of Contents

Other manuals for Zebra MC67

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra MC67 and is the answer not in the manual?

Zebra MC67 Specifications

General IconGeneral
Display diagonal3.5 \
Display resolution640 x 480 pixels
Display number of colors-
Flash memory2 GB
Internal memory0.512 GB
Internal memory typeRAM
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size32 GB
Processor familyInstruments OMAP
Processor frequency0.8 GHz
Processor manufacturerTexas Instruments
USB 2.0 ports quantity1
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-20 - 50 °C
Operating relative humidity (H-H)5 - 95 %
Battery capacity3600 mAh
Data network4G, HSPA+
Wi-Fi standards802.11a, 802.11b, 802.11g
Product colorBlack
Keyboard layoutQWERTY
Operating system installedWindows Mobile 6.5
Weight and Dimensions IconWeight and Dimensions
Depth33.5 mm
Width77 mm
Height162.2 mm
Weight385 g

Related product manuals