7 - 14 MC67 User Guide
1. Ensure that Bluetooth is enabled and discoverable on both devices.
2. Ensure that the two devices are within 30 feet (10 meters) of one another.
3. Click Start > All Programs > Microsoft ActiveSync.
4. Click File > Connection Settings.
Figure 7-10
ActiveSync Connection Settings
5. On the Allow connections to one of the following drop-down list, select the COM port with the number
noted earlier.
6. On the MC67, tap > Programs > ActiveSync.
7. Tap Menu > Connect via Bluetooth.
Synchronization is automatically initiated.
If an Authentication is required, the Enter Passcode screen appears, type an alphanumeric passkey (PIN
code), then tap Next; enter the same passkey on the other device.
The passkey is recommended for enhanced security. The passkey must be between 1 to 16 alphanumeric
characters.
If the user does not want to use a passkey, tap Next.
8. To disconnect the ActiveSync connection, tap > ActiveSync > Menu > Disconnect.
9. Tap Disconnect.
Phone Book Access Profile Services
Phone Book Access profile (PBAP) is used to synchronize contacts between a remote device and the MC67.
To establish an PBAP synchronization:
1. Ensure that Bluetooth is enabled and discoverable on both devices.
2. Ensure that the two devices are within 10 meters (32 feet) of one another.
NOTE For additional security, disable network bridging on the computer (specifically, bridging to a Remote NDIS
adapter) before connecting to the computer to pass though to the Internet or a network. For more
information on network bridging, see Windows Help on the computer.
Refer to the Windows Help for instructions on setting up a Bluetooth connection.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
