ZEBRA RFID MOBILE APPLICATION for ANDROID 3 - 7
Locate Tag
Touch Locate Tag from the Home or Menu screen.
Figure 3-4
Locate Tag Screen
On this screen, enter the Tag ID in the text area or select a tag from the Inventory screen to pre-populate the
Tag ID to search.
Touch START to start the locate tag operation. Touch STOP to stop. The RFD8500 trigger can also be used to
start and stop the operation.
The color bar on the display shows the relative distance of the tag.
When the locate tag operation starts, moving to another screen does not stop the operation until Stop is
pressed.
Start/Stop
Toggle
Text Area
Power Management Icon
NOTE The scan trigger on the RFD8500 can also start and stop the inventory operation. The reader must be in
RFID mode. Press the trigger to start, and press again to stop.
To Next Page
Loading...