Zebra RFD8500 User Manual

4 - 10 RFD8500 User Guide
Application
From the Settings screen, touch Application.
Figure 4-7 Settings - Application Screen
The default Application setting is Reader Battery Status.
The application always detects readers that were paired over Bluetooth.
Data Export Settings enable and disable exporting RFID data captured in the Rapid Red and Inventory
screens. Enabling Export Data creates a file in the iOS device which can be exported using iTunes.
To export this file:
1. Connect the iOS device via USB or WiFi to iTunes (running on either a MAC or PC).
2. Select Application.
3. Select the Zebra RFID Mobile App.
4. Select the file to export from the iOS device to the MAC/PC.
NOTE Data Export Settings only apply to iOS devices.

Zebra RFD8500 Specifications

General

Type	Handheld bar code reader
Sensor type	-
Scanner type	1D/2D
Read rate (max)	600 reads/s
Bluetooth version	2.1+EDR
Operating frequency	865 - 868 MHz
Standard interfaces	Bluetooth
Product color	Gray
LED indicators	Yes
Protection features	Dust resistant, Splash proof
Battery capacity	4410 mAh
Power source type	Battery
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	5 - 85 %
Mobile operating systems supported	Android 4.4, Android 5.0, Android 5.1, iOS 8.0, iOS 8.2, iOS 9.0
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	130 mm
Width	185 mm
Height	80 mm
Weight	430 g