Zebra RFD8500 User Manual

4 - 20 RFD8500 User Guide
Access Control
Figure 4-17 Access Control Screens - Read/Write; Lock; Kill Screens
Read/Write
• Tag ID & Password values are in hex. Tag ID is edited.
• Memory Bank options: EPC, RESERVED, TID and USER.
• Offset and Length values are in 16-bit words.
Lock
Lock privilege options:
• Read and Write
• Permanent Lock
• Permanent Unlock
• Unlock.
Kill
Permanently renders the tag unusable. A kill password must be provided.
NOTE DPO must be disabled from the Power Management screen to allow access operation functionality.

Zebra RFD8500 Specifications

General

Type	Handheld bar code reader
Sensor type	-
Scanner type	1D/2D
Read rate (max)	600 reads/s
Bluetooth version	2.1+EDR
Operating frequency	865 - 868 MHz
Standard interfaces	Bluetooth
Product color	Gray
LED indicators	Yes
Protection features	Dust resistant, Splash proof
Battery capacity	4410 mAh
Power source type	Battery
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	5 - 85 %
Mobile operating systems supported	Android 4.4, Android 5.0, Android 5.1, iOS 8.0, iOS 8.2, iOS 9.0
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	130 mm
Width	185 mm
Height	80 mm
Weight	430 g