Zebra TC52 Integrator Guide

Maintenance & Troubleshooting
180
Spare Battery not
charging.
Charger is not
receiving
power.
Ensure the power cable is connected securely to both the
charger and to AC power.
Spare battery is
not correctly
seated.
Remove and re-insert the battery into the battery adapter,
ensuring it is correctly seated.
Battery adapter
is not seated
properly.
Remove and re-insert the battery adapter into the charger,
ensuring it is correctly seated.
Battery was
removed from
the charger or
charger was
unplugged from
AC power too
soon.
Ensure charger is receiving power. Ensure the spare battery is
seated correctly. The battery charges from fully depleted to 90%
in approximately 2.5 hours and from fully depleted to 100% in
approximately three hours.
Battery is faulty. Verify that other batteries charge properly. If so, replace the
faulty battery.
Table 12 Troubleshooting the 4-Slot Battery Charger (Continued)
Problem Cause Solution

Zebra TC52 Specifications

General

RFID reader	-
Scanner type	2D
Product color	Black
Phone function	Yes
Display diagonal	5 \
Touch technology	Dual-touch
Touchscreen type	Capacitive
Display resolution	1280 x 720 pixels
USB 2.0 ports quantity	1
Flash memory	32 GB
Internal memory	4 GB
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	256 GB
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Battery capacity	4150 mAh
Number of cores	8
Processor model	660
Processor family	Snapdragon
Processor frequency	2.2 GHz
Processor manufacturer	Qualcomm
GPS (satellite)	No
Operating system installed	Android
Bluetooth version	5.0
Rear camera aperture number	2.2
Front camera aperture number	2
Rear camera resolution (numeric)	13 MP
Front camera resolution (numeric)	5 MP

Weight and Dimensions

Depth	18.6 mm
Width	75.5 mm
Height	155 mm
Weight	249 g