EasyManuals Logo

Zebra TC52 Integrator Guide

Zebra TC52
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
DataWedge
60
Profiles
DataWedge is based on profiles and plug-ins. A profile contains information on how DataWedge should
behave with different applications.
Profile information consists of:
Associated application
Input plug-in configurations
Output plug-in configurations
Process plug-in configurations.
Using profiles, each application can have a specific DataWedge configuration. For example, each user
application can have a profile which outputs scanned data in the required format when that application comes
to the foreground. DataWedge can be configured to process the same set of captured data differently based on
the requirements of each application.
DataWedge includes the following pre-configured profiles which support specific built-in applications:
Visible profiles:
Profile0 - created automatically the first time DataWedge runs. Generic profile used when there are no
user created profiles associated with an application.
Launcher - enables scanning when the Launcher is in foreground.
DWDemo - provides support for the DWDemo application.
Some Zebra applications are capable of capturing data by scanning. DataWedge is pre-loaded with private
and hidden profiles for this purpose. There is no option to modify the private profiles.
Profile0
Profile0 can be edited but cannot be associated with an application. That is, DataWedge allows manipulation
of plug-in settings for Profile0 but it does not allow assignment of a foreground application. This configuration
allows DataWedge to send output data to any foreground application other than applications associated with
user-defined profiles when Profile0 is enabled.
Profile0 can be disabled to allow DataWedge to only send output data to those applications which are
associated in user-defined profiles. For example, create a profile associating a specific application, disable
Profile0 and then scan. DataWedge only sends data to the application specified in the user-created profile.
This adds additional security to DataWedge enabling the sending of data only to specified applications.
Plug-ins
A plug-in is a software module utilized in DataWedge to extend its functionality to encompass technologies
such as barcode scanning. The plug-ins can be categorized into three types based on their operations:
Input Plug-ins
Output Plug-ins
Process Plug-ins.

Table of Contents

Other manuals for Zebra TC52

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra TC52 and is the answer not in the manual?

Zebra TC52 Specifications

General IconGeneral
RFID reader-
Scanner type2D
Product colorBlack
Phone functionYes
Display diagonal5 \
Touch technologyDual-touch
Touchscreen typeCapacitive
Display resolution1280 x 720 pixels
USB 2.0 ports quantity1
Flash memory32 GB
Internal memory4 GB
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size256 GB
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-20 - 50 °C
Operating relative humidity (H-H)5 - 95 %
Battery capacity4150 mAh
Number of cores8
Processor model660
Processor familySnapdragon
Processor frequency2.2 GHz
Processor manufacturerQualcomm
GPS (satellite)No
Operating system installedAndroid
Bluetooth version5.0
Rear camera aperture number2.2
Front camera aperture number2
Rear camera resolution (numeric)13 MP
Front camera resolution (numeric)5 MP
Weight and Dimensions IconWeight and Dimensions
Depth18.6 mm
Width75.5 mm
Height155 mm
Weight249 g

Related product manuals