DataWedge
71
Touch to return to the previous screen.
Decoder Params
Use Decode Params to configure individual decoder parameters.
NOTE: Not all parameter options are available with all scanners. See the DataWedge app on each device for the available
scanners and parameter options.
NOTE:
Codabar
• CLSI Editing - Enable this parameter to strip the start and stop characters and insert a space after the first,
fifth, and tenth characters of a 14-character Codabar symbol. Enable this feature if the host system requires
this data format (default - disabled).
• Length1 - Use to set decode lengths (default - 6). See Decode Lengths on page 77 for more information.
• Length2 - Use to set decode lengths (default - 55). See Decode Lengths on page 77 for more information.
PDF417 XXXXXX--
QR Code XXXXXX--
Decoder
Signature
OOOOO----
TLC 39 OOOOOOO
Trioptic 39 OOOOOOO
UK Postal OOOOOO--
UPCA XXXXXXX
UPCE0 XXXXXXX
UPCE1 OOOOOOO
US4state OOOOOO--
US4state FICS OOOOOO--
US Planet OOOOOO--
US Postnet OOOOOO--
Table 5 Supported Decoders (Continued)
Decoders
Camera
Internal Imager
SE4710
RS507/RS507X
RS6000
DS2278
DS3678
LI3678
Key
X = Enabled
O = Disabled
-- = Not Supported
To Next Page
Loading...
