INTRODUCTION
Carl Zeiss Notes on warranty Axiovert 200
0-10 B 40-080 e 03/01
Notes on warranty
The manufacturer guarantees that the instrument has no material and production defects when
delivered. You must inform us of any defects immediately and we must do anything to minimize the
damage. If the manufacturer is informed of such a defect, he is obliged to remove it; it is his decision
whether he does this by repairing the instrument or by delivering an instrument free of any defect. No
guarantee is provided for defects caused by natural wear (wearing parts in particular) and improper use.
The instrument manufacturer is not liable for damage caused by faulty operation, negligence or any
other meddling with the instrument, particularly the removal or replacement of instrument components,
or the use of accessories from other manufacturers. This forfeits all the claims against warranty.
With the exception of the work specified in this manual, no maintenance or repair of the microscopes
may be performed. Repairs may only be performed by Carl Zeiss service staff or specially authorized
personnel. Should any defect occur with the instrument, please get in touch with the Carl Zeiss
microscopy service in Germany (see page 4-6) or your local Zeiss agency.
To Next Page
Loading...
