Zeiss i.Profiler plus - Page 37

Installation
000000-1520-928_GA_EN_021013
35
Installation of the Atlas Review Software connection
• Double-click the program icon Initialize Atlas Review Mapping on the
Windows desktop and select the network connector used (peer to peer
connection) in the Initialize Atlas Review Station Connection dialog to
connect the PC with the drive letter R:\. The device will restart.
Configuration of software on the i.Profiler
® plus
• In the Settings window under General the ATLAS Auto-Sync function
can be switched on and off with the ATLAS Auto-Sync toggle switch.
Use the … button to select the drive letter R:\ where you want to save
the archive of the Atlas Review Software.
Configuration of the Atlas Review Station
• Click on Archive and then on Synchronize volume in the Review
Station. The Archive directories to be synchronized dialog is
displayed.
• Click on Add and use the Open dialog to select the ATLAS/
i.Profiler
® plus
archive file "Archive.xml" in the local directory. Click on
Open to add this archive to the list of archives which are to be
synchronized with the Review Station. Confirm with "Yes".
• To make the i.Profiler
® plus
data available on the Review Station you
must click on Archive and then on Synchronize. Depending on the
size of the ATLAS/i.Profiler
® plus
archive synchronization may last a
long time. As soon as synchronization is completed, the data of the
i.Profiler
® plus
can be displayed and analyzed on the ATLAS Review
Station.
• Select Show today's patients to select imported patients.
• Select the Auto option under Options - Settings - Archive/
Synchronize - Synchronize on the ATLAS Review Station in order to
automatically synchronize the databases which are archived in the
network with the ATLAS Review PC.