Shutting down
000000-1520-928_GA_EN_021013
If the device is switched off at the standby button (3, Fig. 6) while
it is in operation, the program will quit automatically before the
device switches to standby mode. Wait until the blue light beside
the standby switch goes off before switching off at the power
switch (6, Fig. 9), pulling the power supply plug or switching off at
the main room switch.
If you switch off the device while it is in operation, pull the power
supply plug or switch off the main room switch the program and
the operating system cannot be shut down properly. This can lead
to the loss of stored data and/or errors in the control software of
the device. This does not present a hazard to patients or the
operator.
To Next Page
Loading...
