40-34 Rear Suspension
Suspension
40
22. Press the seal into the groove at the 3 o’clock
position.
23. Press the seal into the groove at the 9 o’clock
position.
24. Press the seal into the groove about the 1 to 2
o’clock position.
25. Press the seal into the groove at about the 7 to
8 o’clock position.
26. Continue alternating from side to side,
pressing the seal into the outer bearing cover
evenly. Continue pressing the seal into the
groove until the seal is completely seated.
27. Follow the same process to install the outer
seal evenly in the left outer bearing cover.
To Next Page
Loading...
